As the quality and quantity of astrophysical data continue to improve, the precision with which certain astrophysical events can be timed becomes limited not by the data themselves, but by the manner, standard, and uniformity with which time itself is referenced. While some areas of astronomy (most notably pulsar studies) have required absolute time stamps with precisions of considerably better than 1 minute for many decades, recently new areas have crossed into this regime. In particular, in the exoplanet community, we have found that the (typically unspecified) time standards adopted by various groups can differ by as much as a minute. Left uncorrected, this ambiguity may be mistaken for transit timing variations and bias eccentricity measurements. We argue that, since the commonly-used Julian Date, as well as its heliocentric and barycentric counterparts, can be specified in several time standards, it is imperative that their time standards always be reported when accuracies of 1 minute are required. We summarize the rationale behind our recommendation to quote the site arrival time, in addition to using BJD TDB , the Barycentric Julian Date in the Barycentric Dynamical Time standard for any astrophysical event. The BJD TDB is the most practical absolute time stamp for extra-terrestrial phenomena, and is ultimately limited by the properties of the target system. We compile a general summary of factors that must be considered in order to achieve timing precisions ranging from 15 minutes to 1 µs. Finally, we provide software tools that, in principal, allow one to calculate BJD TDB to a precision of 1 µs for any target from anywhere on Earth or from any spacecraft.

We present EXOFAST, a fast, robust suite of routines written in IDL which is designed to fit exoplanetary transits and radial velocity variations simultaneously or separately, and characterize the parameter uncertainties and covariances with a Differential Evolution Markov Chain Monte Carlo method. We describe how our code incorporates both data sets to simultaneously derive stellar parameters along with the transit and RV parameters, resulting in more self-consistent results on an example fit of the discovery data of HAT-P-3b that is well-mixed in under five minutes on a standard desktop computer. We describe in detail how our code works and outline ways in which the code can be extended to include additional effects or generalized for the characterization of other data sets -including non-planetary data sets. We discuss the pros and cons of several common ways to parameterize eccentricity, highlight a subtle mistake in the implementation of MCMC that could bias the inferred eccentricity of intrinsically circular orbits to significantly non-zero results, discuss a problem with IDL's built-in random number generator in its application to large MCMC fits, and derive a method to analytically fit the linear and quadratic limb darkening coefficients of a planetary transit. Finally, we explain how we achieved improved accuracy and over a factor of 100 improvement in the execution time of the transit model calculation. Our entire source code, along with an easy-to-use online interface for several basic features of our transit and radial velocity fitting, are available online at http://astroutils.astronomy.ohio-state.edu/exofast.

Las Cumbres Observatory Global Telescope (LCOGT) is a young organization dedicated to time-domain observations at optical and (potentially) near-IR wavelengths. To this end, LCOGT is constructing a world-wide network of telescopes, including the two 2m Faulkes telescopes, as many as 17 x 1m telescopes, and as many as 23 x 40cm telescopes. These telescopes initially will be outfitted for imaging and (excepting the 40cm telescopes) spectroscopy at wavelengths between the atmospheric UV cutoff and the roughly 1-micron limit of silicon detectors. Since the first of LCOGT's 1m telescopes are now being deployed, we lay out here LCOGT's scientific goals and the requirements that these goals place on network architecture and performance, we summarize the network's present and projected level of development, and we describe our expected schedule for completing it. In the bulk of the paper, we describe in detail the technical approaches that we have adopted to attain the desired performance. In particular, we discuss our choices for the number and location of network sites, for the number and sizes of telescopes, for the specifications of the first generation of instruments, for the software that will schedule and control the network's telescopes and reduce and archive its data, and for the structure of the scientific and educational programs for which the network will provide observations.Comment: 59 pages, 9 figures, 4 tables. AAS Latex v5.2. Accepted for publication in Pub. Astr. Soc. Pacifi

We present the first measurement of the planet frequency beyond the "snow line," for the planet-to-star mass-ratio interval −4.5 < log q < −2, corresponding to the range of ice giants to gas giants. We find d 2 N pl d log q d log s = (0.36 ± 0.15) dex −2 at the mean mass ratio q = 5 × 10 −4 with no discernible deviation from a flat (Öpik's law) distribution in logprojected separation s. The determination is based on a sample of six planets detected from intensive follow-up observations of high-magnification (A > 200) microlensing events during 2005-2008. The sampled host stars have a typical mass M host ∼ 0.5 M , and detection is sensitive to planets over a range of planet-star-projected separations (s −1 max R E , s max R E), where R E ∼ 3.5 AU (M host /M) 1/2 is the Einstein radius and s max ∼ (q/10 −4.3) 1/3. This corresponds to deprojected separations roughly three times the "snow line." We show that the observations of these events have the properties of a "controlled experiment," which is what permits measurement of absolute planet frequency. High-magnification events are rare, but the survey-plus-follow-up high-magnification channel is very efficient: half of all high-mag events were successfully monitored and half of these yielded planet detections. The extremely high sensitivity of high-mag events leads to a policy of monitoring them as intensively as possible, independent of whether they show evidence of planets. This is what allows us to construct an unbiased sample. The planet frequency derived from microlensing is a factor 8 larger than the one derived from Doppler studies at factor ∼25 smaller star-planet separations (i.e., periods 2-2000 days). However, this difference is basically consistent with the gradient derived from Doppler studies (when extrapolated well beyond the separations from which it is measured). This suggests a universal separation distribution across 2 dex in planet-star separation, 2 dex in mass ratio, and 0.3 dex in host mass. Finally, if all planetary systems were "analogs" of the solar system, our sample would have yielded 18.2 planets (11.4 "Jupiters," 6.4 "Saturns," 0.3 "Uranuses," 0.2 "Neptunes") including 6.1 systems with two or more planet detections. This compares to six planets including one twoplanet system in the actual sample, implying a first estimate of 1/6 for the frequency of solar-like systems.

We present the final results from a high sampling rate, multi-month, spectrophotometric reverberation mapping campaign undertaken to obtain either new or improved Hβ reverberation lag measurements for several relatively low-luminosity active galactic nuclei (AGNs). We have reliably measured the time delay between variations in the continuum and Hβ emission line in six local Seyfert 1 galaxies. These measurements are used to calculate the mass of the supermassive black hole at the center of each of these AGNs. We place our results in context to the most current calibration of the broad-line region (BLR) R BLR -L relationship, where our results remove outliers and reduce the scatter at the low-luminosity end of this relationship. We also present velocity-resolved Hβ time-delay measurements for our complete sample, though the clearest velocity-resolved kinematic signatures have already been published.