SUMMARYThe stabilized space-time fluid-structure interaction (SSTFSI) technique developed by the team for advanced flow simulation and modeling is applied to the computation of arterial fluid-structure interaction (FSI) with patient-specific data. The SSTFSI technique is based on the deforming-spatial-domain/stabilized space-time formulation and is supplemented with a number of special techniques developed for arterial FSI. These include a recipe for pre-FSI computations that improve the convergence of the FSI computations, using an estimated zero-pressure arterial geometry, layers of refined fluid mechanics mesh near the arterial walls, and a special mapping technique for specifying the velocity profile at an inflow boundary with non-circular shape. In the test computations reported here, we focus on a patient-specific middle cerebral artery segment with aneurysm, where the arterial geometry is based on computed tomography images.

The stabilized space-time fluid-structure interaction (SSTFSI) technique was applied to arterial FSI problems soon after its development by the Team for Advanced Flow Simulation and Modeling. The SSTFSI technique is based on the Deforming-Spatial-Domain/Stabilized SpaceTime (DSD/SST) formulation and is supplemented with a number of special techniques developed for arterial FSI. The special techniques developed in the recent past include a recipe for pre-FSI computations that improve the convergence of the FSI computations, using an estimated zero-pressure arterial geometry, Sequentially Coupled Arterial FSI technique, using layers of refined fluid mechanics mesh near the arterial walls, and a special mapping technique for specifying the velocity profile at inflow boundaries with non-circular shape. In this paper we introduce some additional special techniques, related to the projection of fluid-structure interface stresses, calculation of the wall shear stress (WSS), and calculation of the oscillatory shear index. In the test computations reported here, we focus on WSS calculations in FSI modeling of a patient-specific middle cerebral artery segment with aneurysm. Two different structural mechanics meshes and three different fluid mechanics meshes are tested to investigate the influence of mesh refinement on the WSS calculations.

SUMMARYNew special fluid-structure interaction (FSI) techniques, supplementing the ones developed earlier, are employed with the Stabilized Space-Time FSI (SSTFSI) technique. The new special techniques include improved ways of calculating the equivalent fabric porosity in Homogenized Modeling of Geometric Porosity (HMGP), improved ways of building a starting point in FSI computations, ways of accounting for fluid forces acting on structural components that are not expected to influence the flow, adaptive HMGP, and multiscale sequentially coupled FSI techniques. While FSI modeling of complex parachutes was the motivation behind developing some of these techniques, they are also applicable to other classes of complex FSI problems. We also present new ideas to increase the scope of our FSI and CFD techniques.

The stabilized space-time fluid-structure interaction (SSTFSI) technique developed by the Team for Advanced Flow Simulation and Modeling (T AFSM) was applied to a number of 3D examples, including arterial fluid mechanics and parachute aerodynamics. Here we focus on the interface projection techniques that were developed as supplementary methods targeting the computational challenges associated with the geometric complexities of the fluidstructure interface. Although these supplementary techniques were developed in conjunction with the SSTFSI method and in the context of air-fabric interactions, they can also be used in conjunction with other moving-mesh methods, such as the Arbitrary Lagrangian-Eulerian (ALE) method, and in the context of other classes of FSI applications. The supplementary techniques currently consist of using split nodal values for pressure at the edges of the fabric and incompatible meshes at the air-fabric interfaces, the FSI Geometric Smoothing Technique (FSI-GST), and the Homogenized Modeling of Geometric Porosity (HMGP). Using split nodal values for pressure at the edges and incompatible meshes at the interfaces stabilizes the structural response at the edges of the membrane used in modeling the fabric. With the FSI-GST, the fluid mechanics mesh is sheltered from the consequences of the geometric complexity of the structure. With the HMGP, we bypass the intractable complexities of the geometric porosity by approximating it with an "equivalent", locally-varying fabric porosity. As test cases demonstrating how the interface projection techniques work, we compute the air-fabric interactions of windsocks, sails and ringsail parachutes.

Multiscale versions of the Sequentially-CoupledArterial Fluid-Structure Interaction (SCAFSI) technique are presented. The SCAFSI technique was introduced as an approximate FSI approach in arterial fluid mechanics. It is based on the assumption that the arterial deformation during a cardiac cycle is driven mostly by the blood pressure. First we compute a "reference" arterial deformation as a function of time, driven only by the blood pressure profile of the cardiac cycle. Then we compute a sequence of updates involving mesh motion, fluid dynamics calculations, and recomputing the arterial deformation. The SCAFSI technique was developed and tested in conjunction with the stabilized space-time FSI (SSTFSI) technique. Beyond providing a computationally more economical alternative to the fully coupled arterial FSI approach, the SCAFSI technique brings additional flexibility, such as being able to carry out the computations in a spatially or temporally multiscale fashion. In the test computations reported here for the spatially multiscale versions of the SCAFSI technique, we focus on a patient-specific middle cerebral artery segment with aneurysm, where the arterial geometry is based on computed tomography images. The arterial structure is modeled with the continuum element made of hyperelastic (Fung) material.