The paper is a comprehensive laboratory comparison study of two galvanic isolated solution off-board battery chargers: (1) Si-based cost-effective case, and (2) SiC-bidirectional ready for vehicle to grid concept case. All circuits are modular, and in both cases the DC/DC converter can be replaced according to the end user requirements (the coupled transformer remains the same and is constructed based on 12xC100 cores to avoid additional choke). In the case of single active bridge, an active RCD snubber is proposed to protect against overvoltage above 1kV in the DC_2 circuit. The dual active bridge is equipped with soft-star modulation using a zero vector to reduce in-rush current in case of no-load operation, while the AC/DC grid connected converter remains bidirectional to assure the highest power quality at the point of common coupling. All tests were made with real second-used batteries, which improves environmental, economic and technical feasibility of such systems for prosumers. The total efficiency of both AC/DC/DC converters (>97% in SiC and >94% in Si versions) was investigated in the same laboratory conditions.
Given their structural arrangement, photovoltaic (PV) modules exhibit parasitic capacitance, which creates a path for high-frequency current during zero-state switching of the converter in transformerless systems. This current has to be limited to ensure safety and electromagnetic compatibility. Many solutions that can minimize or completely avoid this phenomenon, are available. However, most of these solutions are patented because they rely on specific and often complex converter topologies. This study aims to solve this problem by introducing a solution based on a classic converter topology with an appropriate modulation technique and passive filtering. A 5.5 kW single-phase residential PV system that consists of DC-DC boost stage and DC-AC H-bridge converter is considered. Control schemes for both converter stages are presented. An overview of existing modulation techniques for H-bridge converter is provided, and a modification of hybrid modulation is proposed. A system prototype is built for the experimental verification. As shown in the study, with simple filtering and proper selection of switching states, achieving low leakage current level is possible while maintaining high converter efficiency and required energy quality.
The modern industry is dominated by electric drives of the system frequency converter-induction motor, which employ integer-order controllers. Allowing the implementation and adjustment of fractional order controllers in the converter itself greatly expand their capabilities and, therefore, is relevant. This paper reports a procedure for the parametric synthesis of PI λ D μ-controllers of fractional order, providing for the use of the desired forms of fractional order, as well as their practical implementation in the system frequency converter-induction motor. In this case, the control object is described by a transfer function of the fractional or integer order, derived on the basis of experimental results. The study results demonstrate the possibility of constructing new, as well as modernizing existing, electromechanical systems involving the fractional-order PI λ D μ-controllers with an expanded range of dynamic properties that correspond to the desired forms of fractional order. The procedure for the parametric synthesis of a PI λ D μ-controller has been theoretically substantiated, which was confirmed by applying the simulation and during field experiments concerning the system frequency converter-induction motor. The reported procedure is universal because it makes it possible to synthesize the PI λ D μ-controller for standard forms of both the integer and fractional orders. It is clear that the range of the desired standard forms in the synthesis process can include all possible known forms, including those of fractional order. The result of this study allows us to argue that it is possible to apply the developed algorithm of actions for those engineering tasks that aim to build such systems for various industrial mechanisms. At the same time, no restrictions are imposed on the transfer function of the control object
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.