No abstract

Non-invasive optical diagnostic methods allow important information about studied systems to be obtained in a non-destructive way. Complete diagnosis requires information about the chemical composition as well as the morphological structure of a sample. We report on the development of an opto-mechanical probe that combines Raman spectroscopy (RS) and optical coherence tomography (OCT), two methods that provide all the crucial information needed for a non-invasive diagnosis. The aim of this paper is to introduce the technical design, construction and optimization of a dual opto-mechanical probe combining two in-house developed devices for confocal RS and OCT. The unique benefit of the probe is a gradual acquisition of OCT and RS data, which allows to use the acquired OCT images to pinpoint locations of interest for RS measurements. The parameters and the correct functioning of the probe were verified by RS scanning of various samples (silicon wafer and ex vivo tissue) based on their OCT images - lateral as well as depth scanning was performed. Both the OCT and RS systems were developed, optimized and tested with the ultimate aim of verifying the functionality of the probe. Picture: Schematic illustration and visualization of the developed RS-OCT probe.

Within the EU project i-Protect fibre optic sensors for measuring heart rate, respiratory rate and skin temperature are being developed. The plastic optical fibre (POF) sensors are based on macrobending effects, photoplethysmography and fluorescence thermometry. The sensors and monitoring units are integrated into underwear and are communicating wireless via body area network and communication unit with the rescue command centre. All sensors can be removed from the underwear to allow washing the textile. First prototypes of the fibre optic sensors were tested in comparison to commercial reference sensors.

No abstract

The paper deals with the experimental analysis focused on the determination of strain in wooden building structures using optical fibers with FBG sensors. Firstly, optical fibers were used to measure displacements of layers and surface strain of the lower surface of the ceiling panels made from mechanically jointed cross laminated timber (CLT). The measured displacement values of the optical fibers were compared with the results obtained from the inductive displacement sensors. Secondly, optical fibers were used for long-term monitoring of the roof structure of the sports hall. The fibers were mounted on chords of timber trusses and their correct function was verified by a load test.