No abstract

Rolling path squeezes and rolling residual stresses of large diameter circular saw body for wood, generated by rolling pressure from 10 up to 120 bar were examined. X-ray diffraction, Barkhausen noise (BN) and Full Width of the peak at a Half Maximum (FWHM) ( o ) methods for evaluation of residual stresses were used. Dependencies of a tangential rolling residual stresses inside rolling paths upon rolling pressure p (bar) and rolling area A (mm 2 ) were evaluated. The rolling pressure, as large as 60 bar, resulting in the rolling squeeze as high as 0.04 mm 2 , and, tangential residual compression stresses inside a rolling path, as large as  TI = −822 MPa, was considered to be the largest for the practical application.

Abstract. MYTHEN is a single-photon-counting strip detector. Its main features are high spatial resolution, zero noise, fluorescence suppression, fast readout, high dynamic range, radiation-hard and maintenance-free design. Perspectives of such a detector in residual stress measurements involve: (i) Measurements of absorbing/thick materials (ii) Well resolved peaks (iii) excellent signal-to-noise ratio (iv) Analysis of alloys (v) Fast data collection (vi) Accurate low content retained austenite measurements (vii) in situ measurements and mapping (viii) infinite life cycle. Technical details and application in synchrotron and laboratory diffractometers will be presented.