The knee meniscus is a highly porous structure which exhibits a grading architecture through the depth of the tissue. The superficial layers on both femoral and tibial sides are constituted by a fine mesh of randomly distributed collagen fibers while the internal layer is constituted by a network of collagen channels of a mean size of 22.14 $$\mu $$ μ m aligned at a $$30^{\circ }$$ 30 ∘ inclination with respect to the vertical. Horizontal dog-bone samples extracted from different depths of the tissue were mechanically tested in uniaxial tension to examine the variation of elastic and viscoelastic properties across the meniscus. The tests show that a random alignment of the collagen fibers in the superficial layers leads to stiffer mechanical responses (E = 105 and 189 MPa) in comparison to the internal regions (E = 34 MPa). All regions exhibit two modes of relaxation at a constant strain ($$\tau _1 = 6.4$$ τ 1 = 6.4 to 7.7 s, $$\tau _2$$ τ 2 = 49.9 to 59.7 s).

The meniscus is an integral part of the human knee, preventing joint degradation by distributing load from the femoral condyles to the tibial plateau. Recent qualitative studies suggested that the meniscus is constituted by an intricate net of collagen channels inside which the fluid flows during loading. The aim of this study is to describe in detail the structure in which this fluid flows by quantifying the orientation and morphology of the collagen channels of the meniscal tissue. A 7 mm cylindrical sample, extracted vertically from the central part of a lateral porcine meniscus was freeze-dried and scanned using the highest-to-date resolution Microscopic Computed Tomography. The orientation of the collagen channels, their size and distribution was calculated. Comparisons with confocal multi-photon microscopy imaging performed on portions of fresh tissue have shown that the freeze-dried procedure adopted here ensures that the native architecture of the tissue is maintained. Sections of the probe at different heights were examined to determine differences in composition and structure along the sample from the superficial to the internal layers. Results reveal a different arrangement of the collagen channels in the superficial layers with respect to the internal layers with the internal layers showing a more ordered structure of the channels oriented at 30$$^{\circ }$$ ∘ with respect to the vertical, a porosity of 66.28% and the mean size of the channels of 22.14 $$\mu {\text {m}}$$ μ m .

In this paper we present the results from a recent micromechanical investigation aimed at developing methodologies for testing and understanding the fundamental behaviour of meniscal tissue. To achieve this, we employed two distinctly different, but equally relevant mechanical testing platformsuniaxial tensile testing and Dynamic Mechanical Analysis. The results from the tensile tests revealed that the studied material exhibits non-linear stress-strain behaviour and that its viscoelastic properties are timedependent. Furthermore, by using DMA it was possible to perform walking and running simulations, which provided further information of the strain=time response of the meniscal samples. The importance of accurate specimen preparation and actual method development are also presented and discussed in detail.