Adhesion is one of the reasons for limiting the use of thermally sprayed coatings. Many factors influence the adhesion of thermally sprayed coatings, for example: quality of the workmanship of surface preparation, method of thermal spraying, processing parameters, and the temperature of the preliminary preheat substrate, properties of the substrate and coating materials. Another one is the surface roughness. Attempts are made to use surface roughness parameters (e.g. Ra, Rz, Rq, Rku, Rsk) for prediction of adhesion of thermally sprayed coatings. However, most often these attempts end in failure. This article discusses the task of assessing the linear correlation between the twelve parameters of roughness or material ratio of various surface profiles and strength bond of coatings. For analysis, the following parameters were selected: Rz, Ra, Rq, Rsk, Rt, RSm, Rp, Rv, Rku, Rmr (50%), Rk, Rpk, Rvk. The steel substrates (S185) were machined by abrasive machining. The surface roughness of the steel substrate ranged Rz = 1.89-5.34 mm. Nickel-based coatings were applied by flame spraying by the Casto Dyn DS 8000 torch. Adhesion of coatings was measured by pull -off method. The flame sprayed coatings were characterized by adhesion to the steel substrate in the range of from 5.53 MPa to 8.28 MPa. The highest value of the correlation coefficient (Pearson -R) between parameters Rp, Rpk, and adhesion of thermally sprayed coatings were found. The coefficient R was equal to the 0.83, and the coefficient of determination R 2 = 0.7. The lowest value of the correlation coefficient was found for the Rku roughness parameter amounting to 0.37. In the measurements carried out, it can be concluded that the prediction of adhesion of the coatings according to the roughness of the substrate, should be carried out by use the parameters characterizing the peaks height of roughness profile.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.