No abstract

A robust and straightforward approach is introduced to synthesize inorganic nanoparticles chemically grafted with a zwitterionic poly(2-methacryroyloxyethylphosphorylcholine) (PMPC) thin layers. The synthesis method is based on the surface-mediated seeded polymerization. In order to observe how the polymer chain architectures affect colloidal interactions, the zinc oxide nanoparticles are grafted with linear brushes and with a thin hydrogel layer, respectively. The thickness of PMPC shell layers spans a few nanometers. The studies on suspension rheology for the nanoparticles show that the nanoparticles with PMPC brushes show the stronger repulsive force than those with the PMPC gel shell due to the entropic stabilization. When the shear force is applied to the Pickering emulsion produced by assembly of the nanoparticles, it is noticeable that the presence of PMPC brushes on the particles rather enhances the drop-to-drop attraction, which presumably stems from the entanglement of polymer chains between the contacted interfacial planes of the emulsion droplets during shearing.

Researches on the oil recovery enhancement using the nanotechnology has recently been studied in the United States. The previous researches has focused mainly on the flow characteristics of nanoparticles in porous media, and the stability of the nano-emulsion itself. However, the analysis did not deal with the size effects between a nano-emulsion and the pore size which has an important role when nano-emulsion flows in the porous media. In this research, nano-based emulsion was fabricated which is able to be applied for the enhanced oil recovery techniques and its characteristics was analyzed. In addition, in order to identify the characteristics of nano-emulsions flowing through the porous media, the size effect was analysed by filtering test. According to the results, when the emulsion was fabricated, SCA(Silane Coupling Agent) or PVA(Poly Vinyl Alcohol) are added to improve the stability of emulsion. As the ratio of the decane to water increased, the viscosity of emulsion and the droplet size also increased. For the filtering test at the atmospheric conditions, the droplet did not go through the filter; only the separated water from the emulsion was able to be filtered. This phenomenon occurred because the droplet was not able to overcome the capillary pressure. At the filtering test by suction pressure, most of the emulsion was filtered over the filter size of 60 µm. However, the ratio of filtration was rapidly degraded at less than 45 µm filters. This is caused due to deformation and destruction of the droplet by strong shear stress when passing through the pore. The results from the study on the basic characteristic of nano-emulsion and filtering test will be expected to play as the important role for the fabrication of the stable nano-emulsion or the research on the recovery of residual oil in porous media.