Transparent heaters have attracted increasing attention for their usefulness in vehicle windows, outdoor displays, and periscopes. We present high performance transparent heaters based on Ag nanowires with electron beam irradiation. We obtained an Ag-nanowire thin film with 48 ohm/sq of sheet resistance and 88.8% (substrate included) transmittance at 550 nm after electron beam irradiation for 120 sec. We demonstrate that the electron beam creates nano-soldering at the junctions of the Ag nanowires, which produces lower sheet resistance and improved adhesion of the Ag nanowires. We fabricated a transparent heater with Ag nanowires after electron beam irradiation, and obtained a temperature of 51 °C within 1 min at an applied voltage of 7 V. The presented technique will be useful in a wide range of applications for transparent heaters.

Push-pull driven Mach-Zehnder intensity modulators with a record low drive voltage of 0.3 V were realized in substrate removed very compact GaAs/ AlGaAs optical waveguides at 1.55 m. The modulator electrode is 7 mm long, corresponding to a drive voltage length product of 0.21 V cm. The modulation is due to linear electro-optic and carrier depletion effects and has a high speed potential. The propagation loss was 8 dB/ cm, making moderately long devices possible.

No abstract

Index-matched indium tin oxide (ITO) electrodes for capacitive touch screen panels have been fabricated to improve optical transmittance and reduce the difference of reflectance (deltaR) between the etched and un-etched regions. 8.5 nm Nb2O5 and 49 nm SiO2 thin films were deposited by magnetron sputtering as index-matching layers between an ITO electrode and a glass substrate. In case of 30 nm ITO electrode, a 4.3% improvement in the optical transmittance and a deltaR of less than 1% were achieved, along with a low sheet resistance of 90 omega/square.

No abstract