Discussed are the recent experimental and theoretical results on palladium-based catalysts for selective hydrogenation of alkynes obtained by a number of collaborating groups in a joint multi-method and multi-material approach. The critical modification of catalytically active Pd surfaces by incorporation of foreign species X into the sub-surface of Pd metal was observed by in situ spectroscopy for X=H, C under hydrogenation conditions. Under certain conditions (low H2 partial pressure) alkyne fragmentation leads to formation of a PdC surface phase in the reactant gas feed. The insertion of C as a modifier species in the sub-surface increases considerably the selectivity of alkyne semi-hydrogenation over Pd-based catalysts through the decoupling of bulk hydrogen from the outmost active surface layer. DFT calculations confirm that PdC hinders the diffusion of hydridic hydrogen. Its formation is dependent on the chemical potential of carbon (reactant partial pressure) and is suppressed when the hydrogen/alkyne pressure ratio is high, which leads to rather unselective hydrogenation over in situ formed bulk PdH. The beneficial effect of the modifier species X on the selectivity, however, is also present in intermetallic compounds with X=Ga. As a great advantage, such PdxGay catalysts show extended stability under in situ conditions. Metallurgical, clean samples were used to determine the intrinsic catalytic properties of PdGa and Pd3Ga7. For high performance catalysts, supported nanostructured intermetallic compounds are more preferable and partial reduction of Ga2O3, upon heating of Pd/Ga2O3 in hydrogen, was shown to lead to formation of PdGa intermetallic compounds at moderate temperatures. In this way, Pd5Ga2 and Pd2Ga are accessible in the form of supported nanoparticles, in thin film models, and realistic powder samples, respectively

Intermetallic compounds are a promising class of materials as stable and selective heterogeneous catalysts. Here, the (111) and (-1-1-1) single crystal surfaces of the PdGa intermetallic compound were studied as model catalysts with regard to the selective hydrogenation of acetylene (C2H2) to ethylene (C2H4). The distinct atomic surface structures exhibit isolated active centers of single atomic and three atomic Pd ensembles, respectively. For the two prototypal model catalyst surfaces, the adsorption sites and configurations for hydrogen (H2), acetylene, and ethylene were investigated by combining scanning tunneling microscopy, temperature-programmed desorption, and ab initio modeling. The topmost Pd surface atoms provide the preferred adsorption sites for all studied molecules. The structural difference of the Pd ensembles has a significant influence on the adsorption energy and configuration of C2H2, while the influence of the ensemble structure is weak for C2H4 and H2 adsorption. To approach the question of catalytic performance, we simulated the reaction pathways for the heterogeneous catalytic hydrogenation of acetylene on the two surfaces by means of density functional theory. Due to the geometrical separation of the Pd sites on the surfaces, the steric approach of the reactants (H and C2Hx) was found to be of importance to the energetics of the reaction. The presented study gives a direct comparison of binding properties of catalytic Pd on-top sites vs three-fold Pd hollow sites and is therefore of major relevance to the knowledge-based design of highly selective hydrogenation catalysts.

No abstract

ABSTRACT:The atomic structure and composition of a catalyst's surface have a major influence on its performance regarding activity and selectivity. In this respect, intermetallic compounds are promising future catalyst materials, as their surfaces exhibit small and well-defined ensembles of active metal atoms. In this study, the active adsorption sites of the 3-fold-symmetric surfaces of the PdGa intermetallic compound were investigated in a combined experimental and computational approach using CO as a test molecule. The PdGa(111) and (−1− 1−1) surfaces exhibit very similar electronic structures, but have Pd sites with very different, well-defined atomic coordination and separation. They thereby serve as prototypical model systems for studying ensemble effects on bimetallic catalytic surfaces. Scanning tunneling microscopy and Fourier transform infrared spectroscopy show that the CO adsorption on both surfaces is solely associated with the topmost Pd atoms and Ga acts only as an inactive spacer. The different local configurations of these Pd atoms dictate the CO adsorption sites as a function of coverage. The experimental results are corroborated by density functional theory and illustrate the site separation and ensemble effects for molecular adsorption on intermetallic single crystalline surfaces.

Intrinsically chiral surfaces of intermetallic compounds are shown to be novel materials for enantioselective processes.T heir advantage is the significantly higher thermal and chemical stability,and therefore their extended application range for catalyzedc hiral reactions compared to surfaces templated with chiral molecular modifiers or auxiliaries.O n the Pd 1 -terminated PdGa(111) surface,r oom-temperature adsorption of as mall prochiral molecule (9-ethynylphenanthrene) leads to exceptionally high enantiomeric excess ratios of up to 98 %. Our findings highlight the great potential of intrinsically chiral intermetallic compounds for the development of novel, enantioselective catalysts that can be operated at high temperatures and potentially also in harsh chemical environments.

The reliability by which molecular motor proteins convert undirected energy input into directed motion or transport has inspired the design of innumerable artificial molecular motors. We have realized and investigated an artificial molecular motor applying scanning tunneling microscopy (STM), which consists of a single acetylene (C2H2) rotor anchored to a chiral atomic cluster provided by a PdGa(111) surface that acts as a stator. By breaking spatial inversion symmetry, the stator defines the unique sense of rotation. While thermally activated motion is nondirected, inelastic electron tunneling triggers rotations, where the degree of directionality depends on the magnitude of the STM bias voltage. Below 17 K and 30-mV bias voltage, a constant rotation frequency is observed which bears the fundamental characteristics of quantum tunneling. The concomitantly high directionality, exceeding 97%, implicates the combination of quantum and nonequilibrium processes in this regime, being the hallmark of macroscopic quantum tunneling. The acetylene on PdGa(111) motor therefore pushes molecular machines to their extreme limits, not just in terms of size, but also regarding structural precision, degree of directionality, and cross-over from classical motion to quantum tunneling. This ultrasmall motor thus opens the possibility to investigatein operandoeffects and origins of energy dissipation during tunneling events, and, ultimately, energy harvesting at the atomic scales.

We present a method, combining optical transmission with electrical resistance, to study the hydrogen uptake in thin transition metal films. The change in optical transmission is used to determine the hydrogen concentration, while the change in resistance serves as an indicator for the ordering of hydrogen. We identify phase boundaries and regions of high and low orders as well as changes in the ordering temperature. As a demonstration of this approach we compare the hydrogen uptake of 50 and 10 nm single-crystal vanadium films. The ordered phase is found to be extended to higher temperatures in the thinner sample.

No abstract