The rule-based approach, i.e. following electromagnetic interference standards, is the basic methodology assumed to result in electromagnetic compatible systems operating properly in their intended environment. For complex systems we need a smarter approach, based on assessing and controlling the electromagnetic risks. This risk-based approach is described, and applied to naval ships.
The increased implementation of new electronic systems in a small physical space has resulted in complex electromagnetic environments. A ship is an example of such a system with a complex electromagnetic environment. In order to prevent electromagnetic interference in such complex systems, one needs to understand the composition of the environment and the interaction between the different elements. This paper determines the electromagnetic environment onboard ships, with the intention of achieving electromagnetic compatibility using a risk-based approach.
Above deck, cables on naval ships are exposed to highintensity radiated fields and nuclear electromagnetic pulse (NEMP) that may cause conducted interference and generate electromagnetic fields that exceed the immunity levels of commercially available equipment above and below deck. Exposed cables, such as open power plugs or lighting cables, are modeled and characterized both as a monopole antenna perpendicular to the deck and as a transmission line, representing a cable close to the deck. The placement of an illuminated cable close to the deck is a good protection measure for long cables at low frequencies, which includes NEMP protection. The coupled pulse from a high-intensity NEMP illumination is not expected to cause damage on electric installations. It is shown that for exposed cable length of maximum 25 cm and not placed in the line of sight of transmitters above 400 MHz, no additional protection measures are needed.
In many mission-critical systems, such as naval vessels, the power supply system is insulated. An insulated, or unearthed, system has no connection, or via a high impedance, to earth, and often the neutral is not used. An insulated system has drawbacks with respect to electromagnetic compatibility compared to the usual earthed power supply system, mainly due to the limited use of filtering possibilities. This paper provides a qualitative analysis of the advantages and disadvantages of insulated power systems and neutral earthing and the impact on electromagnetic compatibility.
IEC 60533 is a product standard that puts strict requirements on all equipment on board of ships. Except for dedicated bridge equipment, there are hardly any products available that comply. One aspect from this standard is the low emission limit for radio frequency protection of the maritime very high frequency radio telephony system. This limit appears not to be based on a minimum range to receive a distress call, but on the possibility of receiving the lowest possible signal in an assumed placement of equipment. An analysis of the standard and a reconstruction of their rationale have led to an alternative, functional requirement with proper rationale, which can give the system integrator more flexibility in choosing equipment. This novel risk-based approach results in the same objective, i.e., an interference-free environment. Measurements have been performed to demonstrate possible disturbance sources and to investigate the communication range.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.