Commercial ultrafiltration and dialysis membranes have broad pore size distributions and are over 1,000 times thicker than the molecules they are designed to separate, leading to poor size cut-off properties, filtrate loss within the membranes, and low transport rates. Nanofabricated membranes have great potential in molecular separation applications by offering more precise structural control, yet transport is also limited by micrometre-scale thicknesses. This limitation can be addressed by a new class of ultrathin nanostructured membranes where the membrane is roughly as thick (approximately 10 nm) as the molecules being separated, but membrane fragility and complex fabrication have prevented the use of ultrathin membranes for molecular separations. Here we report the development of an ultrathin porous nanocrystalline silicon (pnc-Si) membrane using straightforward silicon fabrication techniques that provide control over average pore sizes from approximately 5 nm to 25 nm. Our pnc-Si membranes can retain proteins while permitting the transport of small molecules at rates an order of magnitude faster than existing materials, separate differently sized proteins under physiological conditions, and separate similarly sized molecules carrying different charges. Despite being only 15 nm thick, pnc-Si membranes that are free-standing over 40,000 microm2 can support a full atmosphere of differential pressure without plastic deformation or fracture. By providing efficient, low-loss macromolecule separations, pnc-Si membranes are expected to enable a variety of new devices, including membrane-based chromatography systems and both analytical and preparative microfluidic systems that require highly efficient separations.

No abstract

While Staphylococcus aureus osteomyelitis is considered to be incurable, the major bacterial reservoir in live cortical bone has remained unknown. In addition to biofilm bacteria on necrotic tissue and implants, studies have implicated intracellular infection of osteoblasts and osteocytes as a mechanism of chronic osteomyelitis. Thus, we performed the first systematic transmission electron microscopy (TEM) studies to formally define major reservoirs of S. aureus in chronically infected mouse (Balb/c J) long bone tissue. Although rare, evidence of colonized osteoblasts was found. In contrast, we readily observed S. aureus within canaliculi of live cortical bone, which existed as chains of individual cocci and submicron rod-shaped bacteria leading to biofilm formation in osteocyte lacunae. As these observations do not conform to the expectations of S. aureus as non-motile cocci 1.0–1.5 µm in diameter, we also performed immunoelectron microscopy (IEM) following in vivo BrdU labeling to assess the role of bacterial proliferation in canalicular invasion. The results suggest that the deformed bacteria: 1) enter canaliculi via asymmetric binary fission; and 2) migrate toward osteocyte lacunae via proliferation at the leading edge. Additional in vitro studies confirmed S. aureus migration through a 0.5 µm porous membrane. Collectively, these findings define a novel mechanism of bone infection, and provide possible new insight as to why S. aureus implant related infections of bone tissue are so challenging to treat.

The analogous techniques of photoactivation of fluorescence (PAF) and fluorescence recovery after photobleaching (FRAP) have been applied previously to the study of actin dynamics in living cells. Traditionally, separate experiments estimate the mobility of actin monomer or the lifetime of actin filaments. A mathematical description of the dynamics of the actin cytoskeleton, however, predicts that the evolution of fluorescence in PAF and FRAP experiments depends simultaneously on the diffusion coefficient of actin monomer, D, the fraction of actin in filaments, FF, and the lifetime of actin filaments, tau (, Biophys. J. 69:1674-1682). Here we report the application of this mathematical model to the interpretation of PAF and FRAP experiments in subconfluent bovine aortic endothelial cells (BAECs). The following parameters apply for actin in the bulk cytoskeleton of subconfluent BAECs. PAF: D = 3.1 +/- 0.4 x 10(-8) cm2/s, FF = 0.36 +/- 0.04, tau = 7.5 +/- 2.0 min. FRAP: D = 5.8 +/- 1.2 x 10(-8) cm2/s, FF = 0.5 +/- 0.04, tau = 4.8 +/- 0.97 min. Differences in the parameters are attributed to differences in the actin derivatives employed in the two studies and not to inherent differences in the PAF and FRAP techniques. Control experiments confirm the modeling assumption that the evolution of fluorescence is dominated by the diffusion of actin monomer, and the cyclic turnover of actin filaments, but not by filament diffusion. The work establishes the dynamic state of actin in subconfluent endothelial cells and provides an improved framework for future applications of PAF and FRAP.

Porous nanocrystalline silicon (pnc-Si) is a 15 nm thin freestanding membrane material with applications in small-scale separations, biosensors, cell culture and lab-on-a-chip devices. Pnc-Si has already been shown to exhibit high permeability to diffusing species and selectivity based on molecular size or charge. In this report we characterize properties of pnc-Si in pressurized flows. We compare results to long-standing theories for transport through short pores using actual pore distributions obtained directly from electron micrographs. Measurements are in agreement with theory over a wide range of pore sizes and porosities and at orders-of-magnitude higher than those exhibited by commercial ultrafiltration and experimental carbon nanotube membranes. We also show that pnc-Si membranes can be used in dead-end filtration to fractionate gold nanoparticles and protein size ladders with better than 5 nm resolution, insignificant sample loss, and little dilution of the filtrate. These performance characteristics, combined with scalable manufacturing, make pnc-Si filtration a straightforward solution to many nanoparticle and biological separation problems.

The intracellular movement of the bacterial pathogen Listeria monocytogenes has helped identify key molecular constituents of actin-based motility (recent reviews ). However, biophysical as well as biochemical data are required to understand how these molecules generate the forces that extrude eukaryotic membranes. For molecular motors and for muscle, force-velocity curves have provided key biophysical data to distinguish between mechanistic theories. Here we manipulate and measure the viscoelastic properties of tissue extracts to provide the first force-velocity curve for Listeria monocytogenes. We find that the force-velocity relationship is highly curved, almost biphasic, suggesting a high cooperativity between biochemical catalysis and force generation. Using high-resolution motion tracking in low-noise extracts, we find long trajectories composed exclusively of molecular-sized steps. Robust statistics from these trajectories show a correlation between the duration of steps and macroscopic Listeria speed, but not between average step size and speed. Collectively, our data indicate how the molecular properties of the Listeria polymerization engine regulate speed, and that regulation occurs during molecular-scale pauses.

Here we report on the development of a breakthrough microfluidic human in vitro cerebrovascular barrier (CVB) model featuring stem cell-derived brain-like endothelial cells (BLECs) and nanoporous silicon nitride (NPN) membranes (µSiM-CVB). The nanoscale thinness of NPN membranes combined with their high permeability and optical transparency makes them an ideal scaffold for the assembly of an in vitro microfluidic model of the blood–brain barrier (BBB) featuring cellular elements of the neurovascular unit (NVU). Dual-chamber devices divided by NPN membranes yield tight barrier properties in BLECs and allow an abluminal pericyte-co-culture to be replaced with pericyte-conditioned media. With the benefit of physiological flow and superior imaging quality, the µSiM-CVB platform captures each phase of the multi-step T-cell migration across the BBB in live cell imaging. The small volume of <100 µL of the µSiM-CVB will enable in vitro investigations of rare patient-derived immune cells with the human BBB. The µSiM-CVB is a breakthrough in vitro human BBB model to enable live and high-quality imaging of human immune cell interactions with the BBB under physiological flow. We expect it to become a valuable new tool for the study of cerebrovascular pathologies ranging from neuroinflammation to metastatic cancer.

The actin-based motility of the bacterium, Listeria monocytogenes, is a model system for understanding motile cell functions involving actin polymerization. Although the biochemical and genetic aspects of Listeria motility have been intensely studied, biophysical data are sparse. Here we have used high-resolution laser tracking to follow the trailing ends of Listeria moving in the lamellae of COS7 cells. We found that pauses during motility occur frequently and that episodes of step-like motion often show pauses spaced at about 5.4 nm, which corresponds to the spatial periodicity of F-actin. We occasionally observed smaller steps (<3 nm), as well as periods of motion with no obvious pauses. Clearly, bacteria do not sense cytoplasmic viscoelasticity because they fluctuate 20 times less than adjacent lipid droplets. Instead, bacteria bind their own actin 'tails, and the anchoring proteins can 'step' along growing filaments within the actin tail. Because positional fluctuations are unusually small, the forces of association and propulsion must be very strong. Our data disprove the brownian ratchet models and limit alternative models, such as the 'elastic' brownian ratchet or the 'molecular' ratchet.