Regenerative medicine seeks to repair or replace dysfunctional tissues with engineered biological or biohybrid systems. Current clinical regenerative models utilize simple uniform tissue constructs formed with cells cultured onto biocompatible scaffolds. Future regenerative therapies will require the fabrication of complex three-dimensional constructs containing multiple cell types and extracellular matrices. We believe bioprinting technologies will provide a key role in the design and construction of future engineered tissues for cell-based and regenerative therapies. This review describes the current state-of-the-art bioprinting technologies, focusing on direct-write bioprinting. We describe a number of process and device considerations for successful bioprinting of composite biohybrid constructs. In addition, we have provided baseline direct-write printing parameters for a hydrogel system (Pluronic F127) often used in cardiovascular applications. Direct-write dispensed lines (gels with viscosities ranging from 30 mPa*s to greater than 600×106 mPa*s) were measured following mechanical and pneumatic printing via three commercially available needle sizes (20ga, 25ga, and 30ga). Example patterns containing microvascular cells and isolated microvessel fragments were also bioprinted into composite 3D structures. Cells and vessel fragments remained viable and maintained in vitro behavior after incorporation into biohybrid structures. Direct-write bioprinting of biologicals provides a unique method to design and fabricate complex, multi-component 3D structures for experimental use. We hope our design insights and baseline parameter descriptions of direct-write bioprinting will provide a useful foundation for colleagues to incorporate this 3D fabrication method into future regenerative therapies.

Vascular tone control is essential in blood pressure regulation, shock, ischemia-reperfusion, inflammation, vessel injury/repair, wound healing, temperature regulation, digestion, exercise physiology, and metabolism. Here we show that a well-known growth factor, FGF2, long thought to be involved in many developmental and homeostatic processes, including growth of the tissue layers of vessel walls, functions in vascular tone control. Fgf2 knockout mice are morphologically normal and display decreased vascular smooth muscle contractility, low blood pressure and thrombocytosis. Following intra-arterial mechanical injury, FGF2-deficient vessels undergo a normal hyperplastic response. These results force us to reconsider the function of FGF2 in vascular development and homeostasis in terms of vascular tone control.

During angiogenesis, the microvasculature displays both vessel remodeling and expansion under the control of both cellular and extracellular influences. We have evaluated the role of angiogenic and angiostatic molecules on angiogenesis in an in vitro model that more appropriately duplicates the cellular and extracellular components of this process. Freshly isolated microvessel fragments from rat adipose tissue (RFMF) were cultured within three-dimensional collagen I gels. These fragments were characterized at the time of isolation and were composed of vessel segments observed in the microvasculature of fat in situ (i.e., arterioles, venules, and capillaries). Fragments also exhibited characteristic ablumenally associated cells including smooth muscle cells and pericytes. Finally, fragments were encased in an extracellular matrix composed of collagen type IV and collagen type I/III. The elongation of microvascular elements was subsequently evaluated using morphologic and immunocytochemical techniques. The proliferation, migration, and elongation of cellular elements in microvessel fragments from rat adipose tissue was dependent on initial fragment density, matrix density, and required serum. Inclusion of endothelial cell growth factors to microvessel fragments from rat adipose tissue 3-D cultures resulted in the accelerated elongation of tube structures and the expression of von Willebrand factor in cells constituting these tubes. Molecules with reported angiostatic capacity (e.g., transforming growth factor and hydrocortisone) inhibited vessel tube elongation. In vitro methods have been developed to evaluate numerous mechanisms associated with angiogenesis, including endothelial cell proliferation, migration, and phenotypic modulation. Microvascular endothelial cell fragments described in this study represent an in vitro population of cells that accurately duplicate the in vivo microcirculatory elements of fat. The proliferation of cells and elongation of microvascular elements subsequently observed in three-dimensional cultures provides an in vitro model of angiogenesis. Microvascular formation in this system results from pre-existing microvessel fragments unlike tube formation observed when cultured endothelial cells are placed in three-dimensional gels. This form of tube formation from cultured endothelium is more characteristic of vasculogenesis. Thus, the formation of microvascular elements from microvessel fragments provides the opportunity to examine the mechanisms regulating angiogenesis in an in vitro system amenable to precise experimental manipulation.

Externally applied boundary conditions regulate neovessel sprouting and elongation during angiogenesis, affecting both neovessel growth characteristics and network morphometry. Furthermore, neovessels align parallel to the direction of stress/strain or internally generated traction, and this may be because of collagen fibril alignment induced by the growing neovessels themselves.

Angiogenesis is regulated by the local microenvironment, including the mechanical interactions between neovessel sprouts and the extracellular matrix (ECM). However, the mechanisms controlling the relationship of mechanical and biophysical properties of the ECM to neovessel growth during sprouting angiogenesis are just beginning to be understood. In this research, we characterized the relationship between matrix density and microvascular topology in an in vitro 3D organ culture model of sprouting angiogenesis. We used these results to design and calibrate a computational growth model to demonstrate how changes in individual neovessel behavior produce the changes in vascular topology that were observed experimentally. Vascularized gels with higher collagen densities produced neovasculatures with shorter vessel lengths, less branch points, and reduced network interconnectivity. The computational model was able to predict these experimental results by scaling the rates of neovessel growth and branching according to local matrix density. As a final demonstration of utility of the modeling framework, we used our growth model to predict several scenarios of practical interest that could not be investigated experimentally using the organ culture model. Increasing the density of the ECM significantly reduced angiogenesis and network formation within a 3D organ culture model of angiogenesis. Increasing the density of the matrix increases the stiffness of the ECM, changing how neovessels are able to deform and remodel their surroundings. The computational framework outlined in this study was capable of predicting this observed experimental behavior by adjusting neovessel growth rate and branching probability according to local ECM density, demonstrating that altering the stiffness of the ECM via increasing matrix density affects neovessel behavior, thereby regulated vascular topology during angiogenesis.

Objective-We have previously demonstrated the ability to construct 3-dimensional microvascular beds in vitro via angiogenesis from isolated, intact, microvessel fragments that retain endothelial cells and perivascular cells. Our objective was to develop and characterize an experimental model of tissue vascularization, based on the implantation of this microvascular construct, which recapitulated angiogenesis, vessel differentiation, and network maturation. Methods and Results-On implantation in a severe combined-immunodeficient mouse model, vessels in the microvascular constructs rapidly inosculated with the recipient host circulation. Ink perfusion of implants via the left ventricle of the host demonstrated that vessel inosculation begins within the first day after implantation. Evaluation of explanted constructs over the course of 28 days revealed the presence of a mature functional microvascular bed. Using a probe specific for the original microvessel source, 91.7%Ϯ11% and 88.6%Ϯ19% of the vessels by day 5 and day 28 after implantation, respectively, were derived from the original microvessel isolate. Similar results were obtained when human-derived microvessels were used to build the microvascular construct. Key Words: vascularization Ⅲ microcirculation Ⅲ angiogenesis Ⅲ human Ⅲ vascular remodeling V ascularization is the process by which perfusion pathway length and vessel segment number are increased and organized into a functional vascular bed. In normal situations, this effective increase in vessel density delivers more blood to the tissue, facilitating tissue growth and/or increased tissue activity. 1,2 Consequently, vascularization is a primary component of tissue growth and repair, such as occurs during development, 3 after an upstream occlusive event leading to tissue ischemia, 4 or during proliferative events, as seen in tissue healing 5,6 and tumor growth. 7 Although we know of many factors and signals that initiate or terminate the vascularization process, little is known about the rules that govern vascularization as an integrated process that includes angiogenesis, 3 arteriogenesis, 8 vascular remodeling, 9 vessel adaptation, 10 and arterio-venous polarization. 11 We have previously shown that isolated intact microvessel fragments retain angiogenic potential and are capable of forming a simple microvascular bed when cultured in a 3-dimensional collagen I gel. 12 In this microvascular construct, the vessel fragments undergo stereotypical angiogenesis, forming neovessels that maintain patent lumen and perivascular cell associations. Furthermore, the vessel fragments within this culture system are responsive to proangiogenic conditions. 12,13 All of this occurs in the absence of blood flow and relatively few nonvascular cells. Conclusions-WithHere we report the development and characterization of an experimental model of tissue vascularization based on the implantation of this microvascular construct. Precultured or freshly formed microvascular constructs implanted subcutaneously inosculate with the...

We describe a method for generating primary cultures of human brain microvascular endothelial cells (HBMVEC). HBMVEC are derived from microvessels isolated from temporal tissue removed during operative treatment of epilepsy. The tissue is mechanically fragmented and size-filtered using polyester meshes. The resulting microvessel fragments are placed onto type-I collagen-coated flasks to allow HBMVEC to migrate and proliferate. The overall process takes under 3 h and does not require specialized equipment or enzymatic processes. HBMVEC are typically cultured for approximately 1 month until confluence. Cultures are highly pure (~97% endothelial cells; ~3% pericytes), reproducible, and display characteristic brain endothelial markers (von Willebrand factor, glucose transporter-1), robust expression of tight and adherens junction proteins, caveolin-1, and efflux protein P-glycoprotein. Monolayers of HBMVEC display characteristic high transendothelial electric resistance and have proven useful in multiple functional studies for in-vitro modeling of the human blood-brain barrier.

We have previously demonstrated that implanted microvessels form a new microcirculation with minimal host-derived vessel investment. Our objective was to define the vascular phenotypes present during neovascularization in these implants and identify post-angiogenesis events. Morphological, functional and transcriptional assessments identified three distinct vascular phenotypes in the implants: sprouting angiogenesis, neovascular remodeling, and network maturation. A sprouting angiogenic phenotype appeared first, characterized by high proliferation and low mural cell coverage. This was followed by a neovascular remodeling phenotype characterized by a perfused, poorly organized neovascular network, reduced proliferation, and re-associated mural cells. The last phenotype included a vascular network organized into a stereotypical tree structure containing vessels with normal perivascular cell associations. In addition, proliferation was low and was restricted to the walls of larger microvessels. The transition from angiogenesis to neovascular remodeling coincided with the appearance of blood flow in the implant neovasculature. Analysis of vascularspecific and global gene expression indicates that the intermediate, neovascular remodeling phenotype is transcriptionally distinct from the other two phenotypes. Therefore, this vascular phenotype likely is not simply a transitional phenotype but a distinct vascular phenotype involving unique cellular and vascular processes. Furthermore, this neovascular remodeling phase may be a normal aspect of the general neovascularization process. Given that this phenotype is arguably dysfunctional, many of the microvasculatures present within compromised or diseased tissues may not represent a failure to progress appropriately through a normally occurring neovascularization phenotype.