No abstract

No abstract

This study aims to determine the distance between the mobile sensor node (i.e., bicycle) and the anchor node (i.e., coach) in outdoor and indoor environments. Two approaches were considered to estimate such a distance. The first approach was based on the traditional channel propagation model that used the log-normal shadowing model (LNSM), while the second approach was based on a proposed hybrid particle swarm optimizationartificial neural network (PSO-ANN) algorithm to improve the distance estimation accuracy of the mobile node. The first method estimated the distance according to the LNSM and the measured received signal strength indicator (RSSI) of the anchor node, which in turn used the ZigBee wireless protocol. The LNSM parameters were measured based on the RSSI measurements in both outdoor and indoor environments. A feed-forward neural network type and the Levenberg-Marquardt training algorithm were used to estimate the distance between the mobile node and the coach. The hybrid PSO-ANN algorithm significantly improved the distance estimation accuracy more than the traditional LNSM method without additional components. The hybrid PSO-ANN algorithm achieved a mean absolute error of 0.022 m and 0.208 m for outdoor and indoor environments, respectively. The effect of anchor node density on localization accuracy was also investigated in the indoor environment.

In the last few years, intensive research has been done to enhance artificial intelligence (AI) using optimization techniques. In this paper, we present an extensive review of artificial neural networks (ANNs) based optimization algorithm techniques with some of the famous optimization techniques, e.g., genetic algorithm (GA), particle swarm optimization (PSO), artificial bee colony (ABC), and backtracking search algorithm (BSA) and some modern developed techniques, e.g., the lightning search algorithm (LSA) and whale optimization algorithm (WOA), and many more. The entire set of such techniques is classified as algorithms based on a population where the initial population is randomly created. Input parameters are initialized within the specified range, and they can provide optimal solutions. This paper emphasizes enhancing the neural network via optimization algorithms by manipulating its tuned parameters or training parameters to obtain the best structure network pattern to dissolve the problems in the best way. This paper includes some results for improving the ANN performance by PSO, GA, ABC, and BSA optimization techniques, respectively, to search for optimal parameters, e.g., the number of neurons in the hidden layers and learning rate. The obtained neural net is used for solving energy management problems in the virtual power plant system.

No abstract

No abstract

This paper presents an adaptive fuzzy logic controller (FLC) design technique for photovoltaic (PV) inverters using differential search algorithm (DSA). This technique avoids the exhaustive traditional trial and error procedure in obtaining membership functions (MFs) used in conventional FLCs. This technique is implemented during the inverter design phase by generating adaptive MFs based on the evaluation results of the objective function formulated by the DSA. In this work, the mean square error (MSE) of the inverter output voltage is used as an objective function. The DSA optimizes the MFs such that the inverter provides the lowest MSE for output voltage and improves the performance of the PV inverter output in terms of amplitude and frequency. The design procedure and accuracy of the optimum FLC are illustrated and investigated using simulations conducted for a 3 kW three-phase inverter in a MATLAB/Simulink environment. Results show that the proposed controller can successfully obtain the desired output when different linear and nonlinear loads are connected to the system. Furthermore, the inverter has reasonably low steady state error and fast response to reference variation.

No abstract