Improvements in the performance and availability of commercial instrumentation have made ion mobility-mass spectrometry (IM-MS) an increasingly popular approach for the structural analysis of ionic species as well as for separation of complex mixtures. Here, a new research instrument is presented which enables complex experiments, extending the current scope of IM technology. The instrument is based on a Waters SYNAPT G2-Si IM-MS platform, with the IM separation region modified to accept a cyclic ion mobility (cIM) device. The cIM region consists of a 98 cm path length, closed-loop traveling wave (TW)-enabled IM separator positioned orthogonally to the main ion optical axis. A key part of this geometry and its flexibility is the interface between the ion optical axis and the cIM, where a planar array of electrodes provides control over the TW direction and subsequent ion motion. On either side of the array, there are ion guides used for injection, ejection, storage, and activation of ions. In addition to single and multipass separations around the cIM, providing selectable mobility resolution, the instrument design and control software enable a range of “multifunction” experiments such as mobility selection, activation, storage, IMS n , and importantly custom combinations of these functions. Here, the design and performance of the cIM-MS instrument is highlighted, with a mobility resolving power of approximately 750 demonstrated for 100 passes around the cIM device using a reverse sequence peptide pair. The multifunction capabilities are demonstrated through analysis of three isomeric pentasaccharide species and the small protein ubiquitin.

There is increasing biopharmaceutical interest in oligosaccharides and glycosylation. A key requirement for these sample types is the ability to characterize the chain length, branching, type of monomers, and importantly stereochemistry and anomeric configuration. Herein, we showcase the multi-function capability of a cyclic ion mobility (cIM) separator embedded in a quadrupole/time-of-flight mass spectrometer (Q-ToF MS). The instrument design enables selective activation of mobility-separated precursors followed by cIM separation of product ions, an approach analogous to MS n . Using high cIM resolution, we demonstrate the separation of three isomeric pentasaccharides and, moreover, that three components are present for each compound. We show that structural differences between product ions reflect the precursor differences in some cases but not others. These findings are corroborated by a heavy oxygen labelling approach. Using this methodology, the identity of fragment ions may be assigned. This enables us to postulate that the two main components observed for each pentasaccharide are anomeric forms. The remaining low abundance component is assigned as an open-ring form. Electronic supplementary material The online version of this article (10.1007/s13361-019-02168-9) contains supplementary material, which is available to authorized users.

Ion mobility mass spectrometry (IM-MS) allows separation of native protein ions into “conformational families”. Increasing the IM resolving power should allow finer structural information to be obtained and can be achieved by increasing the length of the IM separator. This, however, increases the time that protein ions spend in the gas phase and previous experiments have shown that the initial conformations of small proteins can be lost within tens of milliseconds. Here, we report on investigations of protein ion stability using a multipass traveling wave (TW) cyclic IM (cIM) device. Using this device, minimal structural changes were observed for Cytochrome C after hundreds of milliseconds, while no changes were observed for a larger multimeric complex (Concanavalin A). The geometry of the instrument (Q-cIM-ToF) also enables complex tandem IM experiments to be performed, which were used to obtain more detailed collision-induced unfolding pathways for Cytochrome C. The instrument geometry provides unique capabilities with the potential to expand the field of protein analysis via IM-MS.

The first molecular capsule based on an [Ir(ppy)(2)](+) unit (ppy = 2-phenylatopyridine) has been prepared. Following the development of a method to resolve rac-[(Ir(ppy)(2)Cl)(2)] into its enantiopure forms, homochiral Ir(6)L(4) octahedra where obtained with the tritopic 1,3,5-tricyanobenzene. Solution studies and X-ray diffraction show that these capsules encapsulate four of the six associated counteranions and that these can be exchanged for other anionic guests. Initial photophysical studies have shown that an ensemble of weakly coordinating ligands can lead to luminescence not present in comparable mononuclear systems.

An ion mobility mass spectrometer has been modified to allow optical interrogation of ions with different mass-to-charge (m/z) ratios and/or mobilities (K). An ion gating and trapping procedure has been developed which allows us to store ions for several seconds enabling UV photodissociation (UVPD).

The use of charge-reducing reagents to generate lower-charge ions has gained popularity in the field of native mass spectrometry (MS) and ion mobility mass spectrometry (IM-MS). This is because the lower number of charged sites decreases the propensity for Coulombic repulsions and unfolding/restructuring, helping to preserve the native-like structure. Furthermore, lowering the charge state consequently increases the mass-to-charge values (m/z), effectively increasing spacing between signals originating from small mass differences, such as different proteoforms or protein–drug complexes. IM-MS yields collision cross section (CCS, Ω) values that provide information about the three-dimensional structure of the ion. Traveling wave IM (TWIM) is an established and expanding technique within the native MS field. TWIM measurements require CCS calibration, which is achieved via the use of standard species of known CCS. Current databases for native-like proteins and protein complexes provide CCS values obtained using normal (i.e., non-charge-reducing) conditions. Herein, we explored the validity of using “normal” charge calibrants to calibrate for charge-reduced proteins and show cases where it is not appropriate. Using a custom linear field drift cell that enables the determination of ion mobilities from “first principles”, we directly determined CCS values for 19 protein calibrant species under three solution conditions (yielding a broad range of charge states) and two drift gases. This has established a database of CCS and reduced-mobility (K 0) values, along with their associated uncertainties, for proteins and protein complexes over a large m/z range. TWIM validation of this database shows improved accuracy over existing methods in calibrating CCS values for charge-reduced proteins.

We present a new variable temperature (VT), high resolution ion mobility (IM) drift tube coupled to a commercial mass spectrometer (MS). Ions are generated in an electrospray ion source with a sampling cone interface and two stacked ring RF guides which transfer ions into the mobility analyzer located prior to a quadrupole time-of-flight mass spectrometer. The drift cell can be operated over a pressure range of 0.5-3 Torr and a temperature range of 150-520 K with applied fields typically between 3 and 14 V cm. This makes the instrument suitable for rotationally averaged collision cross section (CCS) measurements at low E/N ratios where ions are near thermal equilibrium with the buffer gas. Fundamental studies of the effective ion temperatures can be performed at high E/N ratios. An RF ion trap/buncher is located at the beginning of the drift region, which modulates the continuous ion beam into spatially narrow packets. Packets of ions then drift in a linear electric field, which is 50.5 cm long, and are separated according to their mobility in an inert buffer gas. Post-drift, an ion funnel focuses the radially spread pulses of ions into the inlet of a commercial MS platform (Micromass QToF2). We present the novel features of this instrument and results from VT-IM-MS experiments on a range of model systems-IMS CCS standards (Agilent ESI Tune Mix), the monomeric protein Ubiquitin (8.6 kDa), and the tetrameric protein complex Concanavalin A (103 kDa). We evaluate the performance of the instrument by comparing ambient CCS values of model compounds with those found in the literature. Several effects of temperature on collision cross sections and resolution are observed. For small rigid molecules, changes in resolution are consistent with anticipated thermal diffusion effects. Changes in measured CCS for these rigid systems at different temperatures are attributed primarily to the effect of temperature on the long-range attractive interaction. Similar effects are seen for protein ions at low temperatures, although there is also some evidence for structural transitions. By heating the protein ions, their conformational profiles are significantly altered. Very high temperatures narrow the conformational space presented by both Ubiquitin and Concanavalin; it appears that diverse conformational families are "melted" into more homogeneous populations. Because of this conformational heterogeneity, the apparent IMS resolution obtained for proteins at ambient and reduced temperatures is an order of magnitude lower than the expected diffusion limited resolution (R). This supports a hypothesis that the broad CCS features frequently observed for proteins do not correspond to interconverting conformers, but rather to high numbers of intrinsically stable structures.

Ion mobility-mass spectrometry (IM-MS) is a powerful technique for structural characterization, e.g., sizing and conformation, particularly when combined with quantitative modeling and comparison to theoretical values. Traveling wave IM-MS (TW-IM-MS) has recently become commercially available to nonspecialist groups and has been exploited in the structural study of large biomolecules, however reliable calibrants for large anions have not been available. Polyoxometalate (POM) species—nanoscale inorganic anions—share many of the facets of large biomolecules, however, the full potential of IM-MS in their study has yet to be realized due to a lack of suitable calibration data or validated theoretical models. Herein we address these limitations by reporting DT-IM (drift tube) data for a set of POM clusters {M12} Keggin 1, {M18} Dawson 2, and two {M7} Anderson derivatives 3 and 4 which demonstrate their use as a TW-IM-MS calibrant set to facilitate characterization of very large (ca. 1–4 nm) anionic species. The data was also used to assess the validity of standard techniques to model the collision cross sections of large inorganic anions using the nanoscale family of compounds based upon the {Se2W29} unit including the trimer, {Se8W86O299} A, tetramer, {Se8W116O408} B, and hexamer {Se12W174O612} C, including their relative sizing in solution. Furthermore, using this data set, we demonstrated how IM-MS can be used to conveniently characterize and identify the synthesis of two new, i.e., previously unreported POM species, {P8W116}, unknown D, and {Te8W116}, unknown E, which are not amenable to analysis by other means with the approximate formulation of [H34W118X8M2O416]44–, where X = P and M = Co for D and X = Te and M = Mn for E. This work establishes a new type of inorganic calibrant for IM-MS allowing sizing, structural analysis, and discovery of molecular nanostructures directly from solution.