No abstract

No abstract

No abstract

No abstract

This paper examines the impact of different chemistry–turbulence interaction approaches on the accuracy of simulations of coal gasification in entrained flow reactors. Infinitely fast chemistry is compared with the eddy dissipation concept considering the influence of turbulence on chemical reactions. Additionally, ideal plug flow reactor study and perfectly stirred reactor study are carried out to estimate the accuracy of chosen simplified chemical kinetic schemes in comparison with two detailed mechanisms. The most accurate global approach and the detailed one are further implemented in the computational fluid dynamics (CFD) code. Special attention is paid to the water–gas shift reaction, which is found to have the key impact on the final gas composition. Three different reactors are examined: a pilot-scale Mitsubishi Heavy Industries reactor, a laboratory-scale reactor at Brigham Young University and a Conoco-Philips E-gas reactor. The aim of this research was to assess the impact of gas phase reaction model accuracy on simulations of the entrained flow gasification process. The investigation covers the following issues: impact of the choice of gas phase kinetic reactions mechanism as well as influence of the turbulence–chemistry interaction model. The advanced turbulence–chemistry models with the complex kinetic mechanisms showed the best agreement with the experimental data.

No abstract

Computational fluid dynamics (CFD) modeling of an entrained-flow reactor is demonstrated and compared with experimental data. The study is focused on char conversion modeling and its impact on gasification simulation results. An innovative procedure of optimizing input data to empirical char conversion kinetic-diffusion model is investigated, based on the complex carbon burnout kinetic model for oxidation (CBK/E) and gasification (CBK/G). The kinetics of the CBK/G model is determined using the data from char gasification experiments in a drop tube reactor. CFD simulations are performed for the laboratory-scale entrained-flow reactor at Brigham Young University for the bituminous coal. A substantial impact of applied kinetic parameters on the in-reactor gas composition and char conversion factor was observed. The effect was most considerable for the reduction zone, where gasification reactions dominate, although a non-negligible impact could also be observed in the flame zone. Based on the quantitative assessment of the incorporated optimization procedure, its application allowed to obtain one of the lowest errors of CO, H2, CO2, and H2O axial distribution with respect to the experimental data. The maximum errors for these species were equal to 18.48, 7.95, 10.15, and 20.22%, respectively, whereas the average errors were equal to 4.82, 5.47, 4.72, and 9.58%, respectively.

One of the processes that can serve to valorise low-quality biomass and organic waste is hydrothermal carbonization (HTC). It is a thermochemical process that transpires in the presence of water and uses heat to convert wet feedstocks into hydrochar (the solid product of hydrothermal carbonization). In the present experimental study, an improvement consisting of an increased hydrophobic character of HTC-treated biomass is demonstrated through the presentation of enhanced mechanical dewatering at different pressures due to HTC valorisation. As part of this work’s scope, flashing-off of low-quality steam is additionally explored, allowing for the recovery of the physical enthalpy of hot hydrochar slurry. The flashing-off vapours, apart from steam, contain condensable hydrocarbons. Accordingly, a membrane system that purifies such effluent and the subsequent recovery of chemical energy from the retentate are taken into account. Moreover, the biomethane potential is calculated for the condensates, presenting the possibility for the chemical energy recovery of the condensates.