The Laboratory of Aviation Safety and Security at CTU in Prague has recently started a project aimed at runway protection zones. The probability of exceeding by a certain distance from the runway in common incident/accident scenarios (takeoff/landing overrun/veer-off, landing undershoot) is being identified relative to the runway for any airport. As a result, the size and position of safety areas around runways are defined for the chosen probability. The basis for probability calculation is a probabilistic model using statistics from more than 1400 real-world cases where jet airplanes have been involved over the last few decades. Other scientific studies have contributed to understanding the issue and supported the model's application to different conditions.
Undoubtedly air transport in today's world wouldn't be able to exist without any air traffic control service. As the air transport has been coming through major changes and it has been expanding, it is assumed that its volume will be doubled in the next 15 years. Air traffic control uses strictly organised procedures to ensure safe course of air operations. With the skies covered with more airplanes every year, new tools must be introduced to allow the controllers to manage this rising amount of flying aircraft and to keep the air transport safe. This paper provides a comprehensive and organized material, which describes the newest tools and systems used by air traffic control officers. It proposes improvements for further research and development of ATC tools.
With the expanding electrification in all sectors of transport, it is necessary to look for new efficient solutions for propulsion systems for use in air transport. One of the approaches can be the use of electric ducted fans (EDFs), especially in, but not limited to, the case of unmanned aerial vehicles with vertical takeoff and landing. This concept has been known for several decades but has been used very little and therefore has been almost unexplored. This opens up opportunities for investigating the performance characteristics, electrical consumption or efficient thrust vectoring of EDFs with respect to their design and operational use. The presented study therefore deals with the influence of the EDF design change on its performance characteristics. These design changes mainly concerned the geometry of the cowling, i.e., reduction and increase of outlet cross section, and arrangement of fans, i.e., one- and two-rotor specification. The comparison was based on measuring of vertical thrust and power consumption during static testing. The results showed that the increasing outlet is the most suitable construction for the generation of vertical thrust during static testing, considering the specifically used EDF construction arrangement. Based on the findings, it can also be concluded that EDFs are a suitable option for use in unmanned aircraft as a competition to other propulsion systems.
Abstract-This article focuses on the use of thermal imaging in aviation. In the never ending pursuit of lower costs, the Thermal Imaging offers shorter inspection times thanks to its application in aircraft inspections and can reduce the number of costly goarounds using the Enhanced Vision System, which also increases safety in one of the most dangerous parts of flight. Thermal Imaging also offers solutions for Airport Perimeter Security and it can be used for construction of ground surveillance system.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.