In modern gas turbines for power generation and future aircraft engines, the necessity to reduce NOx emissions led to the implementation of a premixed combustion technology under fuel-lean conditions. In the combustion chamber of these systems, extreme pressure amplitudes can occur due to the unsteady heat release, reducing component life time or causing unexpected shutdown events. In order to understand and predict these instabilities, an accurate knowledge of the combustion process is inevitable. This study, which was provided by numerical methods, such as Computational Fluid Dynamics (CFD) is based on a three-dimensional (3D) geometry representing a premixed swirl-stabilized methane-fired burner configuration with a known flow field in the vicinity of the burner and well defined operating conditions. Numerical simulations of the swirl-stabilized methane-fired burner have been carried out using the commercial code ANSYS Fluent. The main objective is to validate the performance of various combustion models with different complexity by comparing against experimental data. Experiments have been performed for the swirl-stabilized methane-fired burner applying different technologies. Velocity fluctuation measurements have been carried out and validated through several techniques, such as Laser Doppler Anemometry (LDA) and Particle Image Velocimetry (PIV). Laser Interferometric Vibrometry (LIV) provided information on heat release fluctuations and OH*-chemiluminescence measurements have been done to identify the position of the main reaction zone. During the first part of the CFD investigation, the cold flow has been simulated applying different turbulence models and the velocity flow field obtained in the experiments has been compared with the numerical results. As next, the study focuses on the numerical analysis of the thermo-chemical processes in the main reaction zone. Few combustion models have been investigated beginning from Eddy Dissipation Model (EDM) and proceeding with increased complexity investigating the Steady Flamelet Model (SLF) and Flamelet Generated Manifold (FGM). An evaluation of the velocity field and temperature profile has been performed for all models used in order to test the validity of the numerical approach for the chosen geometry. The best option for future investigations of gas turbines has been identified.
For one and a half decade, software for interferometric fringe evaluation has been developed and used at Technical University Graz. Within the framework of an awarded grant to one of the authors, the Austrian Government funded activities on optical metrology in mechanical engineering. In this grant these software packages on interferometric fringe evaluation had been subsumed under Windows95/98/NT and the Unix/X-Window-System. This software is made accessible via internet to the public domain (http://optics. t'u-graz. ac. at). Its main features are phase-stepping, Fourier domain evaluation and unwrapping techniques as well as algorithms for Abel-inversion and tomographical reconstruction. Additionally, we implemented a bunch of tools for data manipulation, e.g. multiple file handling, filtering, and flexible visualization of data. Some of these features with examples from a multidirectional holographic measurement on a plasma discharge and from speckle interferometry are presented.
Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing this collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS.
Flow in turbomachines is generally highly turbulent. Nonetheless, boundary layers may exhibit laminar-to-turbulent transition, and relaminarization of the turbulent flow may also occur. The state of flow of the boundary layer is important since it influences transport phenomena like skin friction and heat transfer. In this paper, relaminarization in accelerated flat-plate boundary-layer flows is experimentally investigated, measuring flow velocities with laser Doppler anemometry (LDA). Besides the mean values, statistical properties of the velocity fluctuations are discussed in order to understand the processes in relaminarization. It is shown that strong acceleration leads to a suppression of turbulence production. The velocity fluctuations in the accelerated boundary layer flow “freeze,” while the mean velocity increases, thus reducing the turbulence intensity. This leads to a laminar-like velocity profile close to the wall, resulting in a decrease of the local skin friction coefficient. Downstream from the section with enforced relaminarization, a rapid retransition to turbulent flow is observed. The findings of this work also describe the mechanism of retransition.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.