The goal of the study was to analyze fracture properties of adhesive bond using a three-point end-notched flexure test and the compliance-based beam method. Critical strain energy release rates (GIIc) and cohesive laws were obtained for adhesive bonds made of European beech (Fagus sylvatica L.) and adhesives such as EPI, MUF, PRF and PUR. The experiments were assisted with FE analyses employing three different material models of wood: elastic (Elas), symmetric elasto-plastic (EP) and elasto-plastic with different compressive and tensile yield stresses parallel to fiber (EP+). The highest mean GIIc was achieved for PUR (5.40 Nmm−1) and then decreased as follows: 2.33, 1.80, 1.59 Nmm−1 for MUF, EPI, and PRF, respectively. The failure of bondline was brittle and occurred at bondline for EPI, MUF and PRF, and ductile and commonly occurring in wood for PUR adhesive. The FE simulations employing cohesive models agreed well with the experimental findings for all adhesives. FE model with Elas material was found accurate enough for EPI, MUF and PRF adhesives. For PUR adhesive, the model EP+ was found to be the most accurate in prediction of maximal force. The impact of friction between lamellas may be up to 4.2% when varying friction coefficient from 0 to 1. The impact of the grain angle distortion (α) with respect to longitudinal specimen axis showed its high influence on resulting stiffness and maximal force. It was found that three-point end-notched test is suitable for EPI, MUF, and PRF, while it is less appropriate for a bond with PUR adhesive due to notable plastic behavior.
More than one hundred ninety nations, including the European Union, have signed the Paris Agreement to limit the temperature increase to 1.5 °C above pre-industrial levels. Meeting these conditions requires a steep decline in greenhouse gas (GHG) emissions by the year 2030 and zero GHG emissions by 2050. In this study, we investigated the role that wood products can play within Slovenia to reach the 2030 goal of a 55 % reduction in GHG, as compared to 1990 levels. Slovenia, with over 58 % forest cover, is well-positioned to utilize wood products to meet these climate goals. However, questions exist on how increased tree harvesting and local production, and the use of wood products contribute to replacing fossil-based materials and to lower lowering GHG emissions. To better understand the importance of wood products to GHG emission reduction, this study aimed to present a model showing how the forest-based value chain (including construction) could help reach the Paris Agreement goals. We investigated the associated environmental impacts and their related economic costs. The results indicated that Slovenia could reach the 55 % GHG emission reduction goal within 2030 through increasing tree harvesting and using these resources to increase the number of durable wood products produced within Slovenia that store carbon for long periods and substitute for other high GHG emitting materials. However, realizing these potential reductions would rely on the building industry within Slovenia to replace fossil- and mineral-based materials with wood products.
Almost 200 nations, including the European Union, have signed the Paris Agreement that aims to limit the temperature rise to 1.5 °C above pre-industrial levels by reducing greenhouse gas (GHG) emissions. To meet this target, a significant decrease in GHG emissions by 2030 and net zero by 2050 is necessary. To determine the role of wood products in achieving a 55% reduction in GHG emissions by 2030 compared with 1990 levels, we investigated Slovenia’s potential, which has close to 60% forested areas. Therefore, the country could use wood-based products to achieve the agreed-upon climate goals. Nevertheless, uncertainties remain regarding the extent to which increased tree harvesting, local manufacturing, and the utilization of wood products can aid in substituting fossil-derived materials and reducing GHG emissions. A new model was constructed to increase the understanding of the wood products’ (throughout the forest-based industrial ecosystem, incl. construction) potential contribution to reaching the stated emissions targets. Using this linear programming (LP) mathematical optimisation model and carbon footprint calculations based on life cycle assessment methods, a wood flow distribution, the financial investment needed to process these quantities, and the GHG emissions produced and/or saved were calculated. The findings stipulated that Slovenia has the potential to achieve 55 % less GHG emissions by 2030 by expanding logging to at least 3 million m3 and converting the timber to a larger amount of long service-life wooden items made (and utilised) within the country. Such products accumulate carbon for a long time and decrease the need for materials that cause higher GHG emissions. Concomitantly, a better appreciation of the substitution effects in official carbon accounting would be needed. Moreover, to materialize the potential decrease in emissions would require Slovenia’s construction sector to replace fossil- and mineral-based materials with lignocellulosic products, and to increase the capacity to utilize lower-quality wood in high added value applications, which would require significant investment. This paper offers a comprehensive analysis of diverse optimisation outcomes obtained from the investigation into climate action through the use of wood products in Slovenia.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.