Cubic CsPbI 3 perovskite quantum dots (PQDs) with ideal optoelectronic properties are promising materials for solution-processed photovoltaics. However, their phase stability suffers from the weakly bound surface ligands. Here, we report the adoption of p-mercaptopyridine ligand post-treatment on PQDs and obtained enhanced electronic coupling and cubic phase robustness in comparison with the treatment using analogous o-mercaptopyridine and pyridine ligands. As a result, CsPbI 3 PQDs solar cells achieved an efficiency of 14.25%. More importantly, the device stability was drastically improved, showing decent efficiency after storage under ambient conditions for ∼70 days. We revealed that tuning of the anchoring position can facilely enhance the ligand binding strength and surface coverage, providing efficient ways to significantly improve the performance and stability of PQD-based optoelectronic devices.

Due to rapid increase in population, total electricity demands have been quickly rising. Under this circumstance, renewable energy technologies such as photovoltaic (PV) materials need to be urgently developed. Among...

Herein, a facile one step synthesis of Ni-Cu supported on TiO 2 alloy nanoparticles through the polyol method, which reflect high catalytic performance in enzymeless electrochemical glucose sensing and applied onto glassy carbon, is reported. The morphology imaging and physical properties of the Ni-Cu/TiO 2 nanocomposite were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, and energy dispersive X-ray spectroscopy (EDS). The electrochemical studies/characterizations of glucose oxidation were realised in a basic medium and the new sensor was found to be a better electrochemical glucose sensor than Ni/TiO 2 /Ti and CuO/TiO 2 /Ti modified electrodes. The fabricated sensor was highly sensitive (719.9 µA mM-1 cm-2), had a wide linear range (from 0.1 to 6 mM), selective and tolerant towards endogenous species, such as ascorbic acid, uric acid, acetaminophen and sodium chloride.

Among all the different methods to enhance the optical absorption of photovoltaic devices. The plasmonic effect is one the most prominent and effective ways to capture more incident light and also provide good carrier dynamic management. Here, we systematically introduce spherical gold nanoparticles (Au NPs) with different radii in the absorber layer of perovskite solar cells (PSCs). The overall enhanced optical absorption of around 14.20% and 20.02% is achieved for incorporated monolayer and bilayer Au NPs, respectively, in the active layer compared to the pure perovskite layer.Moreover, we employ the metal (Au)-dielectric (TiO 2 and SiO 2 ) nanoparticles in the absorber layer. The optical absorption increases as the core-shell size decreases. The optical absorption elevates in both Au@TiO 2 core-shell and Au@SiO 2 core-shell 17.5% and 3.5%, respectively. These results support superior separation and transfer of charge in the existence of plasmonic NPs. In addition, this study presents a very sophisticated approach in the optical enhancement of PSCs and thus helps to boost the overall photovoltaic device performance.

No abstract