The intense pulsed light (IPL) post-treatment process has attracted great attention in the device fabrication due to its versatility and rapidity particularly for solution process functional structures in devices, flexible/printed electronics, and continuous manufacturing process. The metal oxide materials inherently have multi-functionality and have been widely used in form of thin films or nanostructures in device application such as thin-film transistors, light-emitting diodes, solar cells, supercapacitors, etc. The IPL treatment enhances the physical and/or chemical properties of the functional metal oxide through photothermal effects. However, most metal oxides are transparent to most range of visible light and require more energy for post-treatment. In this review, we have summarized the IPL post-treatment processes for metal oxide thin films and nanostructures in device applications. The sintering and annealing of metal oxides using IPL improved the device performances by employing additional light absorbing layer or back-reflector. The IPL process becomes an innovative versatile post-treatment process in conjunction with multi-functional metal oxides in near-future device applications.

No abstract

Inkjet-printed strain gauges on flexible substrates have recently been investigated for biomedical motion detection as well as the monitoring of structural deformation. This study performed a topographical analysis of an inkjet-printed strain gauge constructed using silver conductive ink on a PET (polyethylene terephthalate) substrate. Serpentine strain-gauge sensors of various thicknesses and widths were fabricated using inkjet printing and oven sintering. The fabricated gauge sensors were attached to curved surfaces, and gauge factors ranging from 2.047 to 3.098 were recorded. We found that the cross-sectional area of the printed strain gauge was proportional to the gauge factor. The correlation was mathematically modelled as y = 0.4167ln(x) + 1.3837, for which the coefficient of determination (R2) was 0.8383.

No abstract

Zinc oxide (ZnO) nanowires (NWs) are wide-bandgap semiconductors that absorb ultraviolet (UV) radiation. Various post-treatment processes have been studied to improve the optical properties of the as-grown ZnO NWs. Among them, Ag nanoparticles (NPs) effectively improved the optical properties on the surface of the ZnO NWs. In this study, ZnO NWs were synthesized via the hydrothermal synthesis method. ZnO NWs were decorated with Ag NPs on the surface of the ZnO NWs in a silver nitrate (AgNO3) aqueous solution by intense pulsed light (IPL) irradiation. Ag NPs were successfully decorated under the following conditions: aqueous AgNO3 solution of 100 nM, an energy of 1 J/cm2, and an exposure time of 8 ms. The responsivity and sensitivity of the ZnO NW UV photodetectors increased by 7.43 and 3.37 times, respectively. The IPL process makes it possible to decorate Ag NPs in a simple manner within an extremely short time.