No abstract

No abstract

Adsorption-driven heat transfer technology using water as working fluid is a promising eco-friendly strategy to address the exponential increase of global energy demands for cooling and heating purposes. Here we present the water sorption properties of a porous aluminum carboxylate metal-organic framework, [Al(OH)(C6H3NO4)]·nH2O, KMF-1, discovered by a joint computational predictive and experimental approaches, which exhibits step-like sorption isotherms, record volumetric working capacity (0.36 mL mL−1) and specific energy capacity (263 kWh m−3) under cooling working conditions, very high coefficient of performances of 0.75 (cooling) and 1.74 (heating) together with low driving temperature below 70 °C which allows the exploitation of solar heat, high cycling stability and remarkable heat storage capacity (348 kWh m−3). This level of performances makes this porous material as a unique and ideal multi-purpose water adsorbent to tackle the challenges of thermal energy storage and its further efficient exploitation for both cooling and heating applications.

The development of new water adsorbents that are hydrothermally stable and can operate more efficiently than existing materials is essential for the advancement of water adsorption-driven chillers. Most of the existing benchmark materials and related systems in this field suffer from clear limitations that must be overcome to meet global requirements for sustainable and green energy production and utilization. Here, we report the energy-efficient water sorption properties of three isostructural metal-organic frameworks (MOFs) based on the simple ligand pyridine-2,4-dicarboxylate, named M-CUK-1 [M3(3-OH)2(2,4-pdc)2] (where M = Co 2+ , Ni 2+ or Mg 2+). The highly hydrothermally-stable CUK-1 series feature step-like water adsorption isotherms, relatively high H2O sorption capacities between P/P0 = 0.10-0.25, stable cycling, facile regeneration, and most importantly, benchmark coefficient of performance (COP) values for cooling and heating at low driving temperature. Furthermore, these MOFs are prepared under green hydrothermal conditions in aqueous solutions. Our joint experimental-computational approach revealed that M-CUK-1 integrates several optimal features, resulting in promising materials as advanced water adsorbents for adsorption-driven cooling and heating applications.

For ex-situ co-doping methods, sintering at high temperatures enables rapid diffusion of Sn4+ and Be2+ dopants into hematite (α–Fe2O3) lattices, without altering the nanorod morphology or damaging their crystallinity. Sn/Be co-doping results in a remarkable enhancement in photocurrent (1.7 mA/cm2) compared to pristine α–Fe2O3 (0.7 mA/cm2), and Sn4+ mono-doped α-Fe2O3 photoanodes (1.0 mA/cm2). From first-principles calculations, we found that Sn4+ doping induced a shallow donor level below the conduction band minimum, which does not contribute to increase electrical conductivity and photocurrent because of its localized nature. Additionally, Sn4+-doping induce local micro-strain and a decreased Fe-O bond ordering. When Be2+ was co-doped with Sn4+-doped α–Fe2O3 photoanodes, the conduction band recovered its original state, without localized impurities peaks, also a reduction in micro-strain and increased Fe-O bond ordering is observed. Also the sequence in which the ex-situ co-doping is carried out is very crucial, as Be/Sn co-doping sequence induces many under-coordinated O atoms resulting in a higher micro-strain and lower charge separation efficiency resulting undesired electron recombination. Here, we perform a detailed systematic characterization using XRD, FESEM, XPS and comprehensive electrochemical and photoelectrochemical studies, along with sophisticated synchrotron diffraction studies and extended X-ray absorption fine structure.