Objective. The dentin-enamel junction (DEJ) plays a crucial role in dental biomechanics; however, little is known about its structure and mechanical behavior. Nevertheless, natural teeth are a necessary model for prosthetic crowns. The mechanical behavior of the natural DEJ and the dentin ceramic junction (DCJ) manufactured with a CAD-CAM system are compared. Methods. The reference samples undergo no modification, while the experimental samples were drilled to receive a cemented feldspathic ceramic crown. Longitudinally cut samples were used to achieve a planar object observation and to look "inside" the tooth. A complete apparatus enabling the study of the compressive mechanical behavior of the involved tooth by a non-contact laser speckle interferometry (SI) was developed to allow nanometric displacements to be tracked during the compression test. Results. It is observed that the DEJ acted as a critical zone accommodating the movement between dentin and enamel. A smooth transition occurs between dentin and enamel. In the modeled prosthetic, the same kind of accommodation effects also occurs, but with a steeper transition slope between dentin and ceramic. Significance. On the natural tooth, the stress accommodation arises from a differential behavior between enamel and dentin from the DEJ. In the ceramic crown, the cemented dentin-ceramic junction should play this role. This study demonstrates the possible realization of prosthetic crown reconstructions approaching biomechanical behaviors.
An apatitic calcium phosphate cement was developed from calcium bis-dihydro-genophosphate monohydrate (or monocalcium phosphate monohydrate, MCPM) and calcium oxide (CaO). The powder had a Ca/P molar ratio of 1.67, and the liquid was either pure water or 0.25 M-1 M sodium phosphate buffer, pH 7.4. The influence of the powder-to-liquid (P/L) ratio on the setting time and the mechanical strength were studied. The best results were obtained for the 1 M phosphate buffer with a P/L ratio of 1.53; the setting time was 7 min and the compressive strength was 25 MPa after 24 h and 33 MPa after 11 d. The mechanism and kinetics of the setting reaction were investigated by X-ray diffraction, differential scanning calorimetry, 31P magic angle spinning-nuclear magnetic resonance and infrared spectrometry. The setting reaction was found to be biphasic: in the first step, during the mixing time, MCPM reacted with CaO immediately to give calcium hydrogenophosphate dihydrate (or dicalcium phosphate dihydrate, DCPD) which, in the second step, reacted more slowly with the remaining CaO to give hydroxyapatite. The conversion of the starting materials to hydroxyapatite was complete within 24 h when the liquid was water, but was slower and incomplete with the phosphate buffers. Of the starting materials, 30% remained after 3 d.
The aim of this study was to evaluate the changes in the transition layer at the interface between yttria partial stabilized tetragonal zirconia polycrystalline (Y-TZP) core and veneering feldspathic ceramic (VITA VM(®)9), under different manufacturing methods. Confocal Raman microscopy and energy dispersive X-ray spectroscopy (EDS) analyses were carried out on tapered veneered cross sections of the interface. For some samples, an additional firing of the core was used, as the application of an optional liner material between the core and veneer. Single Raman spectra were distinguishable between Y-TZP and the veneering materials. VM(®)9 and liner spectra were broadly superimposable. No substantial differences appeared in their chemical elemental composition. 2D Raman images and EDS analysis emphasized changes in the interdiffusion thickness; the additional firing of the core decreased the interdiffusion zone, and the highest firing temperature of the liner increased the interdiffusion zone. These results, which will help us understand the changes in this transition layer, are discussed.
Calcium phosphate-based cements (CPCs) have attracted much interest because of their good osteoconductivity for bone reconstruction. We obtained CPCs by mixing calcium bis-dihydrogenophosphate monohydrate (MCPM) and calcium oxide with water or sodium phosphate buffers (NaP) as liquid phase. Cement samples with different calcium-to-phosphate ratios (Ca/P), liquid-to-powder ratios (L/P) and liquid phases were analyzed by X-rays diffraction (XRD), pH-metry, extensometry and calorimetry. Antibacterial activity on two bacterial strains (Streptococcus mutans, Lactobacillus acidophilus) and a polycontaminated bacterial inoculum was also studied using the agar diffusion method. The best mechanical properties (approximately 25 MPa) corresponded to Ca/P ratios between 1.67 and 2.5, a 1 M sodium phosphate buffer pH 7, as liquid phase and a L/P ratio of 0.6ml g(-1). The final setting time increased with the Ca/P ratio. The setting expansion, around 1-2%, depended on the Ca/P and L/P ratios. The inner temperature of the cements rose to 45 degrees during setting then decreased rapidly. The injectability was 100% up to 3.5 min and then decreased. It increased with increasing the L/P ratio but to the detriment of the compressive strength and setting time. XRD analysis indicated that the setting reaction led to a mixture of calcium hydroxide and calcium-deficient hydroxyapatite even for a Ca/P ratio of 1.67. Consequently, the pH of the surrounding fluids rose to 11.5-12 during their dissolution. Bacterial growth inhibition was only clearly observed for Ca/P>or=2. This bioactive calcium phosphate cement can potentially be employed for pulp capping and cavity lining as classical calcium hydroxide-based cements, but it is not usable, in the present formulation, for root canal filling because of its short setting time.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.