Ti–6Al–4V and stainless steel 316L have been processed by selective laser melting under similar conditions, and their microstructures and mechanical behaviours have been compared in details. Under the investigated conditions, Ti–6Al–4V exhibits a more complex behaviour than stainless steel 316L with respect to the occurrence of microstructural and mechanical anisotropy. Moreover, Ti–6Al–4V appears more sensitive to the build-up of internal stresses when compared with stainless steel 316L, whereas stainless steel 316L appears more prone to the formation of ‘lack of melting’ defects. This correlates nicely with the difference in thermal conductivity between the two materials. Thermal conductivity was shown to increase strongly with increasing temperature and the thermophysical properties appeared to be influenced by variations in the initial metallurgical state.
In this study, samples of stainless steel AISI 316L have been processed by selective laser melting, a layer-by-layer near-net-shape process allowing for an economic production of complex parts. The resulting microstructures have been characterised in details in order to reach a better understanding of the solidification and consolidation processes. The influence of the processing parameters on the mechanical properties was investigated by means of uniaxial tensile testing performed on samples produced with different main orientations with respect to the building direction. A strong anisotropy of the mechanical behaviour was thus interpreted in relation with the microstructures and the processing conditions.
Welding experiments on Al-6005A have been carried out using a fully instrumented milling machine. The power input was calculated from the measured torque and forces. The thermal cycles were measured at various locations close to the weld centreline. A finite element pseudosteady-state uncoupled thermal model was developed, taking into account the influence of the welding parameters on the power input. The distribution of the total power input between surface and volume heat sources was also studied. The measured and predicted thermal cycles are in good agreement when proper contact conditions between the workpiece and the backing plate are introduced.
The fusion-based additive manufacturing of Al alloys has been developing at an ever faster pace since early 2015, after a comparatively slow start with respect to other metallic materials. This paper reviews the recent developments with the aim of identifying challenges and opportunities for future work. Additive Al components possess strongly out-of-equilibrium microstructures resulting in potentially enhanced mechanical properties. A deeper understanding of the thermal history during fabrication, the design of new high strength alloys and the development of better adapted post-processing procedures are still needed to take full advantages of the specificities of additive manufacturing.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.