Secondary Zn–based batteries are a valid alternative to Li for stationary storage, but commercial devices are not yet available, chiefly owing to anode shape‐change and passivation issues. Mildly acidic aqueous solutions are actively studied, since they seem to limit unstable growth of Zn, with respect to the alkaline ones, customary for primary batteries. Additives can further improve the performance of mildly acidic electrolytes. In this work we focus on the impact of a series of quaternary ammonium salts (TBAB, CTAB, DMDTDAB, BDMPAC, BPPEI, PDADMAC), selected to represent a comprehensive range of molecular functionalities. Electrochemical measurements (cyclic voltammetry, chronopotentiometry and galvanostatic‐cycling in split‐cells), combined with 2D and 3D imaging techniques (SEM, stereomicroscopy and in situ tomography) were adopted for the assessment Zn behaviour. This multi‐technique approach pinpointed TBAB as the single most effective additive for low‐current density operation, while at high current densities the additive‐free electrolyte allows better cycling performance, coherently with similar results for alkaline electrolytes.

Among post-lithium ion battery technologies, rechargeable chemistries with Zn anodes bear notable technological promise owing to their high theoretical energy density, lower manufacturing cost, availability of raw materials and inherent safety. However, Zn anodes, when employed in aqueous electrolytes, suffer from hydrogen evolution, passivation, and shape changes. Alternative electrolytes can help tackle these issues, preserving the green and safe characteristics of aqueous-based ones. Deep eutectic solvents (DESs) are promising green and low-cost non-aqueous solvents for battery electrolytes. Specifically, the cycling of Zn anodes in DESs is expected to be reversible, chiefly owing to their dendrite-suppression capability. Nevertheless, apart from a few studies on Zn plating, insight into the cathodic–anodic electrochemistry of Zn in DESs is still very limited. In view of developing DES-based battery electrolytes, it is crucial to consider that a potential drawback might be their low ionic conductivity. Water molecules can be added to the eutectic mixtures by up to 40% to increase the diffusion coefficient of the electroactive species and lower the electrolyte viscosity without destroying the eutectic nature. In this study, we address the electrochemistry of Zn in two different hydrated DESs (ChU and ChEG with ~30% H2O). Fundamental electrokinetic and electrocrystallization studies based on cyclic voltammetry and chronoamperometry at different cathodic substrates are completed with a galvanostatic cycling test of Zn|Zn symmetric CR2032 coin cells, SEM imaging of electrodes and in situ SERS spectroscopy. This investigation concludes with the proposal of a specific DES/H2O/ZnSO4-based electrolyte that exhibits optimal functional performance, rationalized on the basis of fundamental electrochemical data, morphology evaluation and modeling of the cycling response.

No abstract

The Cover Feature shows a schematic representation of Zn plating from an aqueous electrolyte in the presence of Quaternary Ammonium Salts (QASs) (upper part) and in an additive‐free solution (bottom element). The study provides insight into the cycling behavior of zinc anodes in battery context, using QASs as additives in mildly acidic aqueous electrolytes. The cover was designed by one of the paper authors: Elisa Emanuele. More information can be found in the Research Article by B. Bozzini et al.