Cultivators are machines used among others to open and smooth out the surface of the ploughland and to mix mineral fertilizers with soil. The article presents a design of a cultivator mounted on an agricultural tractor with a power of up to 20 kW. The main design assumption mainly focuses on keeping the weight of the device low, while ensuring the required durability. Moreover, the design makes it possible to attach it to the three-point linkage in a category 1 tractor. The drafted design was subjected to the MES analysis, according to which, the maximum travel of the cultivator frame does not exceed 1.3 mm, and the stress typically reaches the level of 40 MPa and does not exceed the stress permissible for the E295 steel. An analysis of the costs of manufacturing the cultivator was also performed and on its basis, it was found that the price should not exceed PLN 1,800.
The work of traditional cyclones is based on the separation of solid particles using only the centrifugal forces. Therefore, they do not demonstrate high gas-cleaning efficiency, particularly in the cases where gas flows are polluted with fine solid particles (about 20 µm in diameter). The key feature of a new-generation multi-channel cyclone separator’s structure is that its symmetrical upgraded curved elements, with openings cut with their plates bent outwards, make channels for the continuous movement of the gas flows from the inflow opening to the central axis. The smoke flue of the vertical gas outflow is located near the cover of the separating chamber. The present work is aimed at studying the applicability of two various viscosity models and their modified versions to simulate aerodynamic processes in an innovative design for a multi-channel cyclone separator with a single inflow, using the computational fluid dynamics. The research results obtained in the numerical simulation are compared to the experimental results obtained using a physical model. The main purpose of this study is to provide information on how the new design for the multi-channel cyclone affects the distribution of gas flow in the cyclone’s channels. The modified viscosity models, k-ε and k-ω, and computational meshes with various levels of detailed elaboration were analyzed. The developed numerical models of a single-inlet multi-channel cyclone separator allow the researchers to describe its advantages and possible methods of improving its new structure. The developed models can be used for simulating the fluid cleaning phenomenon in the improved fourth-channel cyclone separator and to optimize the whole research process.
The paper presents the results of research aimed at the verification of the existing design solutions of four example sowing units for agricultural seed drills with the most frequently used types of sowing wheels. The research was conducted with the use of modern computer simulation systems based on the discrete element method (DEM) with the evaluation of the efficiency of selected design solutions in terms of achieved performance and metering uniformity. The paper includes a description of virtual research models and the employed mathematical models used for mirroring contact between seeds. Moreover, for the purpose of verification of the obtained results, bench tests were conducted using actual models of selected design solutions.
Abstract. The objective of the article was to develop a method of evaluating diagnostic information basing on the existing systems of agricultural tractors diagnostic used in authorized service centers, which will improve of the quality of the evaluation process. Initially, available tractor diagnostic systems were identified in order to gather information about individual diagnostic signals. Following that, the information was verified by empirical evidence concerning a given failure. Thus, the work presents an original evaluation method of the information obtained from the agricultural tractor diagnostic. Obtaining diagnostic information generates certain costs, hence, it is necessary to rationalize and make the processes efficient. Further part of the thesis contains a description and logical verification of the developed method using empirical database. Finally, we presented the method's application for evaluating diagnostic information obtained from the tractor computer diagnostic, in order to examine its effectiveness and for a final verification.The described method of validating diagnostic information creates new cognitive and pragmatic possibilities.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.