There is a growing need to recover raw materials from waste due to increasing environmental concerns and the widely adopted transition to circular economy. For waste tyres, it is necessary to continuously develop methods and processes that can devulcanize rubber vulcanizates into rubber products with qualities and properties that can closely match those of the virgin rubber. Currently, the most common, due to its efficiency and perceived eco-friendliness in recovering raw rubber from waste rubbers, such as tyres, is devulcanization in supercritical carbon dioxide (scCO2) using commercial and typical devulcanizing agents. The scCO2 has been generally accepted as an attractive alternative to the traditional liquid-based devulcanization media because of the resultant devulcanized rubber has relatively better quality than other processes. For instance, when scCO2 is employed to recover rubber from waste tyres (e.g. truck tyres) and the recovered rubber is blended with virgin natural rubber (NR) in various compositions, the curing and mechanical properties of the blends closely match those of virgin NR. The atmospheric toxicity and cost of the commonly used devulcanization materials like chemical agents, oils and solvents have enabled a shift towards utilization of greener (mainly organic) and readily available devulcanization chemical components. This literature review paper discusses the approaches, which have less negative impact on the environment, in chemical devulcanization of rubber vulcanizates. A special focus has been on thermo-chemical devulcanization of waste tyres in scCO2 using common organic devulcanizing agents.
The field of electronics involves complex systems where the active and passive electronic devices are integrated on the rubber substrate, e.g., silicone (Q), which provides, through potting, a strong assembly of these devices on the circuit board. Several other rubbers are employed in the field to strengthen, insulate and seal the components of the electronic machines and instruments, and therefore protect them against damage. These rubbers are typically strengthened and toughened using carbon black (CB). However, due to its noticeable drawbacks, recent research in the field of rubber and electronics has suggested the use of carbon nanotubes (CNTs) as alternative reinforcing fillers to produce electronics rubber composites that do not only have enhanced electrical conductiv¬ity, thermal stability, electromagnetic interference (EMI) shielding, weatherability and insulation properties, but also offer outstanding stretchability, bendability and tear strength under frequent elastic deformation. These performances are similar for both single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) in both the functional and structural composites. Although SWCNTs can result in relatively better homogeneity than MWCNTs, most rubbers often constitute MWCNTs because they are relatively cheaper. The great potential of rubber-CNTs composites being extensively used in the field of electronics is explored in this chapter.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.