A high-speed video imaging system was employed to directly measure the electrode displacement of the small scale resistance spot welding (SSRSW) process. This measurement technique was chosen because it eliminates a number of potential error sources inherent in other electrode displacement measuring techniques. Careful observation of the heating and cooling portions of the electrode displacement curves revealed that each is comprised of two identifiable segments. Distinct high-velocity segments of the displacement curves were thought to correspond to solid-liquid phase transitions in the weld nugget, while lower-velocity portions corresponded to thermal expansion or contraction of solid material. It was found that the magnitudes of the high speed portions of the electrode displacement were more closely correlated with the weld nugget thickness than was the overall magnitude of the electrode displacement. Furthermore, all measures of electrode displacement were more closely correlated to weld nugget thickness than to nugget diameter.
Although there have been many investigations into monitoring and control of resistance spot welding (RSW) of sheet metal having a thickness greater than 0 . 5 mm, that of thinner components has rarely been investigated. Monitoring of expulsion in a small scale RSW process was carried out via measurement of voltage, electrode displacement, and force change during the welding current pulse. It was found that electrode displacement increased steadily during the current pulse for an expulsion free weld. For welds with visible expulsion, the electrode voltage had a small but readily observed spike; the electrode displacement showed a dip or a decrease in total amplitude; the force change during a welding cycle was of greater magnitude. Since the system uses a constant current power supply, the voltage increase corresponds to an increase in dynamic resistance associated with the expulsion event. It was also observed that the magnitude of the electrode displacement dip was directly related to the volume of expelled material. The force change is a relatively sensitive indicator for use in expulsion detection. Of the three signals, detection of the voltage spike is the most readily implemented method for monitoring expulsion in small scale RSW. It was also shown that, owing to the small magnitudes of the forces and displacements, careful design of the welding system is necessary to ensure that unwanted vibrations do not interfere with the process signals.STWJ/367Dr Farson and Mr Chen are in the
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.