Polyvinyliden¯uorid (PVDF)-Sonden zur Messung der Druckerzeugung kleiner MunitionskomponentenPolyvinyliden¯uorid (PVDF)-Sonden sind du Ènne (25 mm) Druckaufnehmer, die in der Lage sind, Schock mit Dru Ècken bis zu mindestens 25 GPa mit einer Nanosekunden-Au¯o Èsung unter Impaktbedingungen zu messen. SummaryPolyvinylidene Fluoride (PVDF) gauges are thin (25 mm) pressure transducers capable of measuring shock pressures up to at least 25 GPa with nanosecond time resolution for impact-loading conditions. In this work the application of PVDF gauges for measurement of the output pressure from small ordnance devices was investigated. Gauge assembly, ®ring ®xtures, and data acquisition and analysis are described in detail. The gauges were used to record the pressure from impact of¯yers accelerated by exploding bridgewire detonators and detonation cord endtips. Consistent peak pressures with standard deviations typically`10% were obtained. The measured pressures were within 10±30% of the pressures calculated from the velocities of the¯yers. The peak pressure correlated with the explosive density of endtips prepared with different explosive loading pressures. These results con®rmed that PVDF gauges produced by the Bauer process yield consistent results useful for characterizing the output of small ordnance devices.
Polyvinyliden¯uorid (PVDF)-Sonden zur Messung der Druckerzeugung kleiner Munitionskomponenten Polyvinyliden¯uorid (PVDF)-Sonden sind du Ènne (25 mm) Druckaufnehmer, die in der Lage sind, Schock mit Dru Ècken bis zu mindestens 25 GPa mit einer Nanosekunden-Au¯o Èsung unter Impaktbedingungen zu messen. In dieser Arbeit wird die Anwendung von PVDF-Sensoren zur Messung der Druckentwicklung kleiner Munitionskomponenten untersucht. Der Sensoraufbau, die Sprenganordnung und die Datenerfassung mit -auswertung werden detailliert beschrieben. Die Sonden wurden dazu benutzt, um den Druck beim Einschlag von``Flyern'' zu ermitteln, die durch explodierende Bru Èckenzu Ènder und Sprengschnu Ère beschleunigt wurden. Es wurden konsistente Spitzendru Ècke mit typischen Standardabweichungeǹ 10% erhalten. Die gemessenen Dru Ècke wichen zwischen 10 und 30% von den Dru Ècken ab, wie sie aus der Geschwindigkeit der Flyer berechnet wurden. Die Spitzendru Ècke korrelierten mit den Dichten der Endstu Ècke , wie sie durch verschiedene Ladedru Ècke pra Èpariert wurden. Die Ergebnisse besta Ètigen, daû die PVFD-Sonden, hergestellt mit dem Bauer-Prozess, konsistente Ergebnisse zur Charakterisierung kleiner Munitionsteile liefern. Sondes poly¯uorure de vinylide Áne (PVDF) en vue de la mesure de la pression ge Âne Âre Âe par de petits composants d'armes Les sondes poly¯uorure de vinylide Áne (PVDF) sont des capteurs de pression minces (25 mm) capables de mesurer des chocs jusqu'a Á des pressions d'au moins 25 GPa avec une re Âsolution de l'ordre de la nanoseconde sous conditions d'impact. Dans la pre Âsente e Âtude, on examine l'utilisation des sondes PVDF en vue de la mesure de l'e Âvolution de la pression de petits composants de munitions. On de Âcrit en de Âtail le montage du capteur, le dispositif explosif et la saisie et le de Âpouillement des donne Âes. Les capteurs ont e Âte  utilise Âs pour de Âterminer la pression lors de l'impact d'e Âle Âments projete Âs acce Âle Âre Âs par l'explosion d'une amorce a Á pont ou d'un cordeau. On a mesure  des pressions de cre Ãte cohe Ârentes avec des e Âcarts-types typiques`10%. Les pressions mesure Âes divergeaient de 10% a Á 30% des pressions calcule Âes a Á partir de la vitesse des e Âle Âments projete Âs. Les pressions de cre Ãte e Âtaient en corre Âlation avec la densite  des extre Âmite Âs pre Âpare Âes sous diffe Ârentes pressions de chargement. Les re Âsultats con®rment que les sondes PVDF fabrique Âes selon le proce Âde  Bauer fournissent des re Âsultats valables pour la caracte Ârisation de petits composants de munitions. SummaryPolyvinylidene Fluoride (PVDF) gauges are thin (25 mm) pressure transducers capable of measuring shock pressures up to at least 25 GPa with nanosecond time resolution for impact-loading conditions. In this work the application of PVDF gauges for measurement of the output pressure from small ordnance devices was investigated. Gauge assembly, ®ring ®xtures, and data acquisition and analysis are described in detail. The gauges were used to record the pressure from i...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.