In view of efforts to develop ferritic creep resistant steels for applications above 600°C the effect of fine precipitate particles on the creep behaviour of ferritic model steels was studied as a function of stress, temperature and particle distribution. The chosen model steels contained 20 % Cr (by mass), up to 0.9 % Nb and up to 0.1 % C to produce NbC volume fractions up to 0.8 % with particle sizes of about 0.11-lm (order of magnitude). The alloys and structures are briefly described (NbC solubility, precipitation and ageing behaviour, recrystallization and grain growth. oxidation resistance) as well as the mechanical short-term behaviour.The creep behaviour was studied between 600°C and 800°C (with emphasis on 700°C) at strain rates between 10-11 and 10-6 s' with times to rupture up to 20000 h. The creep resistance of the model steels at 700°C (for a strain rate of 10-8 S-1) increases with increasing NbC content from about 5 MN/m 2 for the alloy without NbC to about 50 MN/m 2 for the alloys with 0.6 % or 0.8 % NbC.The analysis of the obtained results is the subject of the second part of this report. Die Wirkung feiner Ausscheidungsteilchen auf das Kriechverhalten ferritischer Modellstahle -I. Experimente. 1m Hinblick auf Bernuhunqen urn die Entwicklung ferritischer kriechfester Stahle fur Anwendungen oberhalb von 600°C wurde die Wirkung feiner Ausscheidungsteilchen auf das Kriechverhalten ferritischer Modellstahle in Abhanqiqkeit von Spannung, Temperatur und Ausscheidungsverteilung untersucht. Die ausqewahlten Modellstahle enthielten 20 % Cr (Massengehalt), bis zu 0,9 % Nb und bis zu 0,1% C. urn NbC-Volumenanteile bis zu 0.8 % mit Teilchenqrofsen von unqefahr 0,11-lm (groBenordnungsmaBig) zu erzeugen. Die Legierungen und Gefuge werden kurz beschrieben (Nbc-Losnchkelt, Ausscheidungs-und Alterungsverhalten, Rekristallisation und Kornwachstum, Zunderfestigkeit) und ebenso das mechanische Kurzzeitverhalten. Das Kriechverhalten wurde zwischen 600°C und 800°C (mit Schwerpunkt bei 700°C) bei Dehngeschwindigkeiten zwischen 10-11 s' und 10-6 S-1 mit Bruchzeiten bis zu 20000 h untersucht. Der Kriechwiderstand der Modetlstahle bei 700°C (bei einer Dehngeschwindigkeit von 10-8 s-1) wachst mit wachsendem NbC-Gehalt von unqefahr 5 MN/m 2 fur die Legierung ohne NbC bis unqefahr 50 MN/m 2 fur Legierungen mit 0,6 % oder 0.8 % NbC. Die Analyse der erhaltenen Ergebnisse ist Gegenstand des zweiten Teiles dieses Berichtes.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.