The Interface Region Imaging Spectrograph (IRIS) small explorer spacecraft provides simultaneous spectra and images of the photosphere, chromosphere, transition region, and corona with 0.33 -0.4 arcsec spatial resolution, two-second temporal resolution, and 1 km s −1 velocity resolution over a field-of-view of up to 175 arcsec × 175 arcsec. . IRIS is sensitive to emission from plasma at temperatures between 5000 K and 10 MK and will advance our understanding of the flow of mass and energy through an interface region, formed by the chromosphere and transition region, between the photosphere and corona. This highly structured and dynamic region not only acts as the conduit of all mass and energy feeding into the corona and solar wind, it also requires an order of magnitude more energy to heat than the corona and solar wind combined. The IRIS investigation includes a strong numerical modeling component based on advanced radiative-MHD codes to facilitate interpretation of observations of this complex region. Approximately eight Gbytes of data (after compression) are acquired by B. De Pontieu (B) ·Harvard-Smithsonian Astrophysical Observatory, 60 Garden Street, Cambridge, MA 02138, USA
Solar spicules have eluded modelers and observers for decades. Since the discovery of the more energetic type II, spicules have become a heated topic but their contribution to the energy balance of the low solar atmosphere remains unknown. Here we give a first glimpse of what quiet Sun spicules look like when observed with NASA's recently launched Interface Region Imaging Spectrograph (IRIS). Using IRIS spectra and filtergrams that sample the chromosphere and transition region we compare the properties and evolution of spicules as observed in a coordinated campaign with Hinode and the Atmospheric Imaging Assembly. Our IRIS observations allow us to follow the thermal evolution of type II spicules and finally confirm that the fading of Ca II H spicules appears to be caused by rapid heating to higher temperatures. The IRIS spicules do not fade but continue evolving, reaching higher and falling back down after 500 − 800 s. Ca II H type II spicules are thus the initial stages of violent and hotter events that mostly remain invisible in Ca II H filtergrams. These events have very different properties from type I spicules, which show lower velocities and no fading from chromospheric passbands. The IRIS spectra of spicules show the same signature as their proposed disk counterparts, reinforcing earlier work. Spectroheliograms from spectral rasters also confirm that quiet Sun spicules originate in bushes from the magnetic network. Our results suggest that type II spicules are indeed the site of vigorous heating (to at least transition region temperatures) along extensive parts of the upward moving spicular plasma.
We report on observations of recurrent jets by instruments onboard the Interface Region Imaging Spectrograph (IRIS), Solar Dynamics Observatory (SDO) and Hinode spacecrafts. Over a 4-hour period on July 21st 2013, recurrent coronal jets were observed to emanate from NOAA Active Region 11793. FUV spectra probing plasma at transition region temperatures show evidence of oppositely directed flows with components reaching Doppler velocities of ±100 km s −1 . Raster Doppler maps using a Si IV transition region line show all four jets to have helical motion of the same sense. Simultaneous observations of the region by SDO and Hinode show that the jets emanate from a source region comprising a pore embedded in the interior of a supergranule. The parasitic pore has opposite polarity flux compared to the surrounding network field. This leads to a spine-fan magnetic topology in the coronal field that is amenable to jet formation. Time-dependent data-driven simulations are used to investigate the underlying drivers for the jets. These numerical experiments show that the emergence of current-carrying magnetic field in the vicinity of the pore supplies the magnetic twist needed for recurrent helical jet formation.
The Solar Terrestrial Relations Observatory (STEREO) provides the first opportunity to triangulate the three-dimensional coordinates of active region loops simultaneously from two different vantage points in space. Three-dimensional coordinates of the coronal magnetic field have been calculated with theoretical magnetic field models for decades, but it is only with the recent availability of STEREO data that a rigorous, quantitative comparison between observed loop geometries and theoretical magnetic field models can be performed. Such a comparison provides a valuable opportunity to assess the validity of theoretical magnetic field models. Here we measure the misalignment angles between model magnetic fields and observed coronal loops in three active regions, as observed with the Extreme Ultraviolet Imager (EUVI) on STEREO on 30 April, 9 May, and 19 May 2007. We perform stereoscopic triangulation of some 100 -200 EUVI loops in each active region and compute extrapolated magnetic field lines using magnetogram information from the Michelson Doppler Imager (MDI) on the Solar and Heliospheric Observatory (SOHO). We examine two different magnetic extrapolation methods: (1) a potential field and (2) a radially stretched potential field that conserves the magnetic divergence. We find considerable disagreement between each theoretical model and the observed loop geometries, with an average misalignment angle on the order of 20°-40°. We conclude that there is a need for either more suitable (coronal rather than photospheric) magnetic field measurements or more realistic field extrapolation models.
We analyse one of the first coronal waves observed by STEREO/EUVI associated with a source region just behind the limb, NOAA 10940. We apply the coronal "wave" model proposed by Attrill et al. (2007) to explain the evolution of the observed bright fronts, thereby arguing that the bright fronts and dimmings are due to magnetic reconnections between the expanding CME core and surrounding magnetic structures. We offer a discussion showing that this model provides a mechanism via which CMEs, expanding from a small source region can naturally become large-scale in the low corona.
The Interface Region Imaging Spectrograph (IRIS) is a NASA small explorer mission that provides high-resolution spectra and images of the Sun in the 133 – 141 nm and 278 – 283 nm wavelength bands. The IRIS data are archived in calibrated form and made available to the public within seven days of observing. The calibrations applied to the data include dark correction, scattered light and background correction, flat fielding, geometric distortion correction, and wavelength calibration. In addition, the IRIS team has calibrated the IRIS absolute throughput as a function of wavelength and has been tracking throughput changes over the course of the mission. As a resource for the IRIS data user, this article describes the details of these calibrations as they have evolved over the first few years of the mission. References to online documentation provide access to additional information and future updates.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.