No abstract

The streaming potentials of two different nanofiltration membranes were studied with several electrolyte solutions to investigate the influence of salt type and concentration on the zeta potential and kinetic surface charge density of the membranes. The zeta potentials decreased with increasing salt concentration, whereas the kinetic surface charge densities increased. The kinetic surface charge densities could be described by Freundlich isotherms, except in one case, indicating that the membranes had a negligible surface charge. The kinetic surface charge density observed was caused by adsorbed anions. Salt retention measurements showed different mechanisms for salt separation for the two investigated membranes. One membrane showed a salt retention that could be explained by a Donnan exclusion type of separation mechanism, whereas for the other membrane the salt rejection seemed to be a combination of size and Donnan excluion. Comparing the results obtained by the streaming potential measurements with those of the retention measurements, it could be concluded that the membrane with the highest kinetic surface charge density showed the Donnan exclusion type of separation, whereas the membrane with the lower surface charge density showed a separation mechanism that was not totally determined by Donnan exclusion, size effects seemed to play a role as well.

ABSTRACT:The hindered diffusion of polystyrene in dilute solutions of ethyl acetate through polyimide ultrafiltration membranes has been investigated. The present system did not show specific membrane-solute interactions; furthermore, polystyrene can be considered as a flexible polymer coil. It is shown that the hindered diffusive permeability for monodisperse dilute solutions for a series of molecular weights can be compared well with the diffusive permeability curve of one polydisperse dilute polystyrene solution. In the case of very dilute solutions, the polymer coils have no interaction with each other, and the whole range of molecular-weight-dependent permeabilities can be determined from only one measurement. The diffusion behavior of polydisperse solutions through various polyimide membranes has been investigated as well. It was found that the diffusive permeability curve is strongly dependent on the type of membrane, that is, on the pore size distribution. It was not possible to calculate a pore size distribution from diffusion experiments due to mathematical limitations. Nevertheless, it was shown that hindered diffusion measurements are useful to estimate a maximum pore size for each membrane.

No abstract

No abstract