International audienceThe India-France SARAL/AltiKa mission is the first Ka-band altimetric mission dedi-cated to oceanography. The mission objectives are primarily the observation of the oceanic mesoscales but also include coastal oceanography, global and regional sea level monitoring, data assimilation, and operational oceanography. Secondary objectives include ice sheet and inland waters monitoring. One year after launch, the results widely confirm the nominal expectations in terms of accuracy, data quality and data availability in general.Today's performances are compliant with specifications with an overall observed performance for the Sea Surface Height RMS of 3.4 cm to be compared to a 4 cm requirement. Some scientific examples are provided that illustrate some salient features of today's SARAL/AltiKa data with regard to standard altimetry: data availability, data accuracy at the mesoscales, data usefulness in costal area, over ice sheet, and for inland waters
International audienceThe Ocean Surface Topography Mission/Jason-2 (OSTM/Jason-2) satellite altimetry mission was successfully launched on June 20, 2008, as a cooperative mission between CNES, EUMETSAT, NASA, and NOAA. OSTM/Jason-2 will continue to precisely measure the surface topography of the oceans and continental surface waters, following on the same orbit as its predecessors, TOPEX/Poseidon and Jason-1. To maintain the high-accuracy measurements, the mission carries a dual-frequency altimeter, a three-frequency microwave radiometer, and three precise positioning systems. The objectives of the mission are both operational and scientific. The mission will provide near-real time high-precision altimetric measurements for integration into ocean forecasting models and other products. The mission will also extend the precise surface topography time series started by TOPEX/Poseidon in 1992 over two decades in order to study long-term ocean variations such as mean sea level variations and interannual and decadal oscillations. The measurement system has been adapted to provide quality data nearer to the coasts, and over lakes and rivers. This paper provides an overview of the OSTM/Jason-2 mission in terms of the system design and a brief introduction to the science objectives
The paper gives an overview of the development of satellite oceanography over the past five years focusing on the most relevant issues for operational oceanography. Satellites provide key essential variables to constrain ocean models and/or serve downstream applications. New and improved satellite data sets have been developed and have directly improved the quality of operational products. The status of the satellite constellation for the last five years was, however, not optimal. Review of future missions shows clear progress and new research and development missions with a potentially large impact for operational oceanography should be demonstrated. Improvement of data assimilation techniques and developing synergetic use of high resolution satellite observations are important future priorities.
the altimetry satellite Jason-2 was launched from the Vandenberg site in California. Dedicated to the measure of ocean surface topography, one of the main instruments on-board is a radar altimeter, Poseidon-3, which essentially measures the altimetric range between the spacecraft and the surface.Poseidon-3 is a dual frequency radar altimeter operating in Ku and C bands, very similar to its predecessor Poseidon-2 on-board Jason-1. However some significant improvements have been implemented to improve its tracking capabilities over coastal and inland waters, that is, its capacity to maintain data acquisition over land or mixed land-sea terrain.The performance assessment is excellent: the range measurement accuracy is close to 1.5 cm for 1s averaging and the significant wave height (SWH) noise is less than 12 cm (for a 2m SWH at 1σ ).In terms of range, the short-term drift (along an orbit) is around 1 mm, and the long-term drift is negligible so far. The tracking success is close to 100% over oceans and 80% over land surfaces, the new acquisition and tracking modes inducing significantly higher data availability in comparison with Poseidon-2.We assess Poseidon-3 main improvements, with the presentation of the new modes of echo acquisition and tracking: the median tracking algorithm, DIODE/DORIS acquisition, and the coupling between DIODE and digital elevation model (DEM) information. The median tracking algorithm is shown to reinforce the robustness of the altimetry echoes outside the standard Brown conditions. DIODE acquisition mode increases data availability in land-to-water transitions, providing up to 5 km of extra measurements along track, which constitutes an asset for coastal and small water areas (lakes, rivers) observations. Both are now implemented as the default mode on Jason-2. DIODE/DEM mode remains experimental and requires further adjustments but shows promising features such as acquisition of water surfaces in rough terrain.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.