Biomimetic sol-gel synthesis was used to prepare new FeO(OH) zeolite (clinoptilolite tuff) adsorbent effective for antimony removal. The product was compared with other on the market accessible natural or commercial adsorption materials like granulated ferric hydroxide GEH, powder of zero valent iron (ZVI)- nanofer and the new synthesized oxi(hydr)oxide FeO(OH) and characterized by XRD, XPS, Raman, FT IR, TG, DTA, DTG, TEM and SEM techniques. Based upon the SEM analysis, the oxidized nanofer sample revealed the existence of hematite and goethite and morphology of FeO(OH) dopant confirmed the presence of ferrihydrite, in less extent also magnetite and hematite. Recorded exothermic maxima on DTA curves for powdered FeO(OH) zeolite at 460 °C and for pure component FeO(OH) at 560 °C indicated an 100 °C shifted exothermic effect, which characterized strong chemical interaction of FeO(OH) with zeolite structure. Based upon the XPS analyses, also the difference between Fe species in the raw and FeO(OH) doped zeolite was found in increasing Si/Al ratio, however only at the surface below app. 5 nm, measured as 3.94 for raw and 5.38 for sample treated with alkalic solution. The plotting of adsorption isotherms in the system studied clearly showed the increasing uptake capacity of the adsorbents towards antimony with the increased S(BET) data (GEH ˃FeO(OH)˃FeO(OH) zeolite˃nanofer)

No abstract

No abstract

No abstract

We report on the production and characterization of Heusler-based Ni 2 FeGa microwires exhibiting twoway shape memory effect. The microwires are characterized by a monocrystalline structure with a strong preferred crystallographic orientation that shows [1 1 1] axis parallel to the wire's axis for high-temperature L2 1 austenite phase, while the [0 1 7] axis is preferred for low-temperature monoclinic phase. Variation of crystallographic axis (and corresponding easy magnetization axis) leads to 1600% variation of magnetic permeability due to a 2% strain in axial direction. Such straining is reversible immediately after production without the necessity of further thermal treatment. These properties give the microwire function of very sensitive SMART actuators that can be easily produced in a large amount.