Successive ion layer adsorption and reaction (SILAR) originally developed for the deposition of thin films on solid substrates from solution baths is introduced as a technique for the growth of high-quality core/shell nanocrystals of compound semiconductors. The growth of the shell was designed to grow one monolayer at a time by alternating injections of air-stable and inexpensive cationic and anionic precursors into the reaction mixture with core nanocrystals. The principles of SILAR were demonstrated by the CdSe/CdS core/shell model system using its shell-thickness-dependent optical spectra as the probes with CdO and elemental S as the precursors. For this reaction system, a relatively high temperature, about 220-240 degrees C, was found to be essential for SILAR to fully occur. The synthesis can be readily performed on a multigram scale. The size distribution of the core/shell nanocrystals was maintained even after five monolayers of CdS shell (equivalent to about 10 times volume increase for a 3.5 nm CdSe nanocrystal) were grown onto the core nanocrystals. The epitaxial growth of the core/shell structures was verified by optical spectroscopy, TEM, XRD, and XPS. The photoluminescence quantum yield (PL QY) of the as-prepared CdSe/CdS core/shell nanocrystals ranged from 20% to 40%, and the PL full-width at half-maximum (fwhm) was maintained between 23 and 26 nm, even for those nanocrystals for which the UV-vis and PL peaks red-shifted by about 50 nm from that of the core nanocrystals. Several types of brightening phenomena were observed, some of which can further boost the PL QY of the core/shell nanocrystals. The CdSe/CdS core/shell nanocrystals were found to be superior in comparison to the highly luminescent CdSe plain core nanocrystals. The SILAR technique reported here can also be used for the growth of complex colloidal semiconductor nanostructures, such as quantum shells and colloidal quantum wells.

A series of hydrophilic organic dendron ligands was designed and synthesized for stabilizing high-quality semiconductor and noble metal nanocrystals. The focal point of the dendron ligands is chosen to be a thiol group which is a universal coordinating site for compound semiconductor and noble metal nanocrystals. The methods for binding these dendron ligands onto the surface of the nanocrystals are simple and straightforward. The thin, about 1-2 nm, but closely packed and tangled ligand shell provides sufficient stability for the "dendron-protected nanocrystals" to withstand the rigors of the coupling chemistry and the standard separation/purification techniques. The chemistry presented can be immediately applied for the development of a new generation of biomedical labeling reagents based on high-quality semiconductor nanocrystals. It also provides an alternative path to apply noble metal nanocrystals for developing sensitive detection schemes for chemical and biochemical purposes. The concept may further provide an optimal solution for many other problems encountered in nanocrystal-related research and development, for which the stability of the nanocrystals is a critical issue. Furthermore, the experimental results confirmed that the photochemical stability of colloidal semiconductor and noble metal nanocrystals is the key for developing reliable and reproducible processing chemistry for these nanocrystals.