Energy harvesting using the human body as an antenna is presented. Low-frequency interference, mainly in the 40-60 kHz range, was generated from electronic ballast of a fluorescent light. Radiated electromagnetic energy was induced in a human body and a rectifier circuit converted induced energy into DC power. An input matching network of the diode rectifier was designed based on an equivalent source model of interference. A wristband-type harvesting module comprising a metal electrode designed to be in contact with the human skin was implemented. A power of −8.5 dBm was harvested from the body of a person with a height of 180 cm made to stand 60 cm below a fluorescent light with two 32 W lamps in a hemianechoic chamber. The proposed system can supply energy to the sensors used in body area networks.

No abstract

This study evaluates the strength of surface treatment parts using the hard anodizing method to the aluminum alloy brake disks. In order to achieve weight reduction of vehicles, Eco-friendly cars parts of the high-quality and competitive price is to equip. Especially while pursuing parts of weight reduction, it has to maintain the strength of the surface of the brake by nature. To enhance surface strength of aluminum alloy, we use hard anodizing technology in the surface treatment.This study is resulted of 3 times greater the hardness value of the hard anodized specimen than the aluminum alloy specimen for the lightweight parts of EV brake disk