Ceramic coatings with thickness of 27 µm were fabricated on Mg–7Li alloy in Na2SiO3–C6H18O24P6 solution by microarc oxidation (MAO). The morphology and phase composition of MAO coatings were characterized by scanning electron microscopy (SEM) and X‐ray diffraction (XRD). The corrosion behavior of the bare and MAO coated Mg–7Li alloy was investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). Results showed that the MAO coatings were composed of MgO, Li2O, and Mg2SiO4, and there existed some micropores on the coating surface with a diameter of 3–20 µm. The corrosion potential (Ecorr) and corrosion current density (Icorr) of the MAO coated alloy were about −1.4761 V and 7.204 × 10−7 A/cm2, respectively. The Ecorr of the MAO coated alloy increased by 109.6 mV and its Icorr decreased by three orders compared with that of the bare Mg–7Li alloy. The EIS plots indicated that the impedance of the MAO coated alloy was 15 times higher than that of the bare alloy. The fitting parameters showed that the resistance of the MAO coatings was far greater than that of the bare alloy. The dense intermediate layer and the transition layer of the MAO coatings acted as a barrier to hinder the proceeding of solution permeation, remarkably improving the corrosion resistance of the Mg–7Li alloy.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.