High‐density polyethylene (HDPE) and isotactic polypropylene (PP) were mixed either with a stabilizer or with a stabilizer and a compatibilizer in different mixing ratios. The structure and properties of these blends were analyzed by methods such as torsion pendulum measurements, mechanical short time experiments, electron microscopy, and fracture mechanical toughness tests. The results display a strongly increased impact strength in the HDPE/PP blend with compatibilizer within a specific mixing region. The deformation behavior and the mechanism leading to the increased impact strength of the blends were investigated in tensile tests by acoustic emission analysis and scanning electron microscopy: Increased fibrilation and strong strain was registered in the blend with compatibilizer. The impact strength was modeled, using experimentally measured properties such as energy release rate, matrix and inclusion volumes, the impact strength of each component. The inclusion volume that causes plastic deformation was chosen as an additional parameter. The calculated results are in good agreement with the experimental ones.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.