Evolution of filamentous bacteria in two full-scale experimental MBR systems (microfiltration and ultrafiltration) was studied during two years. Sludge Retention Time (SRT) and Hydraulic Retention Time (HRT) were modified and acted as variables, together with temperature and variation in loading. With SRT values between 20 and 35 d and HRT between 31 and 40 h, both MBR systems presented a high density of filamentous bacteria, according to the Filamentous Index (FI) and Simplified Technique of Filamentous Count (STFC). Highest density was achieved when contaminant loads were high and temperature was low. However, the elevated presence of filamentous bacteria did not affect the quality of effluent or the permeability of the membranes. Nocardioform bacteria showed a high degree of adaptation to the characteristics of the system. Predominance of Nocardioforms gave rise to isolated episodes of massive growth at temperatures between 15 and 20°C, which in turn caused episodes of intense foaming whose most significant consequence was a loss in biomass, leading to a slight increase in transmembrane pressure. In the light of these results, FI and STFC should not be considered as suitable tools for predicting operational problems deriving from filamentous bacteria in MBR systems, which could be prevented through identification.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.