AbstrakKelompok Usaha Melur yang merupakan Mitra kegiatan pengabdian ini memiliki beberapa permasalahan tata kelola manajerial, yaitu: 1) Belum terorganisasinya pembukuan dengan baik. 2) pemasaran produk masih sangat sederhana dan belum memanfaatkan teknologi informasi. 3) Kurangnya alat mesin jahit untuk menambah produksi. Tujuan kegiatan pengabdian masyarakat ini adalah untuk meningkatkan kapasitas manajerial dan pemasaran pada Kelompok Usaha Melur di Desa Sambirejo, Percut Sei Tuan. Tujuan tersebut dicapai melalui pendampingan kepada Kelompok Usaha Melur di bidang pembukuan/pengelolaan keuangan dan strategi marketing berbasis internet. Kelompok Usaha rumah tangga ini bergerak dalam bidang pembuatan keset kaki. Bahan baku produk tersebut menggunakan limbah kain/produksi penjahit lain. Pembuatan keset kaki ini juga memberdayakan ibu-ibu rumah tangga di daerah sekitar yang ingin menambah pengetahuan jahit menjahit dan pada gilirannya menambah penghasilan ibu-ibu anggota kelompok usaha tersebut. Pelatihan pembukuan dilakukan dengan memberikan pemahaman dan pendampingan terkait pencatatan kas masuk dan keluar, penghitungan harga pokok produksi dan pembuatan laporan keuangan. Selanjutnya, pendampingan pemasaran berbasis internet dilakukan dengan memberikan wawasan untuk memaksimalkan teknologi yang ada untuk memasarkan produk mereka. Metode yang dipakai dalam pengabdian ini adalah dengan menggunakan penyuluhan dan pendampingan hingga kelompok usaha melur memiliki pembukuan yang rapih dan memiliki toko online di media sosial. Kata kunci: Pendampingan, Pengelolaan Keuangan, Pemasaran Online, UKM Melur. Abstract “Melur Entrepreneur Community” have several gavernance problem, such as: 1) the absence of bookkeeping systems. 2) traditional marketing strategy, and 3) ineffectiveness of production. This community service activity conducted in Melur Entrepreneur Community aims to overcome the problems as mentioned. That purpose was achieved through training and guiding the member of Melur Entrepreneur Community in bookeeping dan marketing strategy based on Information Technology. Melur Entrepreneur Community are focus in making doormats from the waste of tailor production. They also empowering woman of households who want to gain a knowledge of sewing and in turn would increase their income. Bookkeeping training is done by providing insight and assistance related to the recording of incoming and outgoing cash, cost analysis of production and financial reporting. Furthermore, knowledge of internet based marketing is delivered by providing insight to maximize existing technology to marketing their products. The method which used in this activity is counseling and training to achieve the outcome, that is the availability of bookkeeping and online store on social media.Keywords: training/guiding, financial administration, online marketing, SMEs.
This study aims to produce liquid smoke that will be used as plant pesticide by means of pyrolysis of a mixture of two types of biomass, coconut shells (CS) and empty fruit bunches (EFB). The parameters used are the ratio of the mixture of the two materials and the pyrolyse temperature ranges from 300 to 500 o C. A reactor of 2 kg capacity with indirect heating is used for this study. Heat is obtained from LPG combustion using a burner. Feedstock used in the form of pieces of coconut shells aproximately 5 x 5 cm 2 and the EFB of 3-5 cm in length are first dried using sun energy until they reach a standard dryness. Three difference of feedstock mixture composed of CS and EFB based on mass ratio (Mr) of 25:75, 50:50, and 75:25 are used to know their effect on the liquid product yield. During the process, the smoke is passed through the cyclone to reduce tar content, and then flows into the condenser with a water cooling fluid. After the specified duration of pyrolysis is reached, the LPG is turned off and the furnace is left for cooling. After that, the pyrolysis products; the liquid smoke and the char are collected. The influence of operating parameters such as temperature, heating rate, process duration, and the feedstock mass ratio were considered associated with the quality of the liquid smoke.
UKM Kreasi Sejahtera Abadi merupakan salah satu usaha yang menghasilkan produk kuliner aneka keripik tradisional (snack) yang beralamat di Dusun X Desa Firdaus Kecamatan Sei Rampah Kabupaten Serdang Bedagai. Pada sektor produksi usaha mitra ini masih mengandalkan peralatan sederhana dan manual, begitu pula sektor manajemen usaha serta pembukuan yang masih kurang tepat, sehingga perlu dilakukan kegiatan pengabdian masyarakat kepada mitra dengan merancang, mendemonstrasikan dan memberikan alat TTG penggorengan stainless (deep fryer) yang memiliki kelebihan anti gosong dan hemat waktu. Tim pengabdi juga memberikan pelatihan dan pendampingan manajemen usaha dan pembukuan keuangan agar pelaporan keuangan mitra menjadi rapi dan bagus. Kegiatan ini berlangsung selama 2 bulan. Kegiatan pengabdian ini menghasilkan peningkatan produktivitas usaha kripik tradisional yang awalnya hanya dapat mengakomodir 50 kg menjadi 100 kg/hari. Antusias dan partisipasi anggota mitra serta pihak desa sangat membantu terlaksananya kegiatan pengabdian ini dengan baik dan lancar
This study aims to develop the Syllabus of Welding Technology Courses in the FT Unimed Mechanical Engineering Education Study Program (PTM) to Support Competency Test in Certification Institutions (LSP) with Level IV Qualification of Shielded Metal Arc Welding (SMAW). Specifically, this study aims to: (1) find the SKKNI-based Welding Technology Syllabus Draft Syllabus with the Skill Passport evaluation pattern up to level IV to support the competency test according to the demands of the Professional certification body, (2) find the Syllabus Validation of the Welding Technology Courses developed. by several learning experts / experts, and 3) discovering the effectiveness of syllabus application developed in learning on a limited and broad scale, and (4) disseminating syllabus developed to lecturers in the Department of Mechanical Engineering Education at FT Unimed. To produce operational products in the form of SKKNI-based Welding Technology Learning Syllabus, a process of research and development phase known as "the R&D cycle" is guided by the ADDIE model and is carried out in a very limited time. In the first phase of the survey, a survey method was used through a needs assessment and literature study. The second stage, designing a draft of the Welding Engineering syllabus. The third stage used the trial method through expert review procedures, one-on-one trials, small group trials, and field trials (real classes). In the next stage is the Implementation and Dissemination and evaluation of products. Data collection techniques used in this study were non-test techniques in the form of questionnaire responses from students and expert lecturers.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.