Statistics. We used JMP software from SAS (versions 13 or 14) for all analyses. Data are presented with all data points plotted. Overlayed diamonds represent mean, 95% CI, and overlap marks (horizontal lines above and below the mean line), which define statistical significant difference between groups if not overlapping (P < 0.05). Groups were compared with 1-way ANOVA, applying a Tukey-Kramer posttest correcting for multiple comparisons. A P value of less than 0.05 was considered statistically significant.Study approval. All animal studies were approved by the cantonal veterinary authorities "Kantonale Tierversuchskommission Zürich." The clinical study (CSF sampling) was approved by the local ethical review board of the Kanton of Zurich, and written consent was obtained from all patients or their legal representatives.

Polymerized human hemoglobins (PolyhHbs) are a promising class of red blood cell substitute for use in transfusion medicine. Unfortunately, the application of the commonly used glutaraldehyde cross-linking chemistry to synthesize these materials results in a complex mixture of PolyhHb molecules with highly varied batch-to-batch consistency. We implemented a controlled method of gas exchange and reagent addition that results in a homogeneous PolyhHb product. A fully coupled tangential flow filtration system was used to purify and concentrate the synthesized PolyhHb molecules. This improved method of PolyhHb production could be used to more precisely control the size and reduce the polydispersity of PolyhHb molecules, with minimal effects on the resulting oxygen-carrying capability. In addition to these factors, we assessed how the hemoglobin scavenging protein haptoglobin (Hp) would interact with PolyhHb molecules of varying sizes and quarternary states. Our results indicated that T-state PolyhHbs may be more efficiently detoxified by Hp compared with R-state PolyhHb and unmodified Hb.

Cytokines are immunoregulatory proteins involved in many pathological states with promising potential as therapeutic agents. A diverse array of cytokines has been studied in preclinical disease models since the 1950s, some of which became successful biopharmaceutical products with the advancement of recombinant protein technology in the 1980s. However, following these early approvals, clinical translation of these natural immune signaling molecules has been limited due to their pleiotropic action in many cell types, and the fact that they have evolved to act primarily locally in tissues. These characteristics, combined with poor pharmacokinetics, have hindered the delivery of cytokines via systemic administration routes due to dose-limiting toxicities. However, given their clinical potential and recent clinical successes in cancer immunotherapy, cytokines continue to be extensively pursued in preclinical and clinical studies, and a range of molecular and formulation engineering strategies are being applied to reduce treatment toxicity while maintaining or enhancing therapeutic efficacy. This review provides a brief background on the characteristics of cytokines and their history as clinical therapeutics, followed by a deeper discussion on the engineering strategies developed for cytokine therapies with a focus on the translational relevance of these approaches.

Previously, our lab developed high molecular weight (MW) tense (T) quaternary state glutaraldehyde polymerized bovine hemoglobins (PolybHbs) that exhibited reduced vasoactivity in several small animal models. In this study, we prepared PolybHb in the T and relaxed (R) quaternary state with ultrahigh MW (>500 kDa) with varying cross‐link densities, and investigated the effect of MW on key biophysical properties (i.e., O2 affinity, cooperativity (Hill) coefficient, hydrodynamic diameter, polydispersity, polymer composition, viscosity, gaseous ligand‐binding kinetics, auto‐oxidation, and haptoglobin [Hp]‐binding kinetics). To further optimize current PolybHb synthesis and purification protocols, we performed a comprehensive meta‐data analysis to evaluate correlations between procedural parameters (i.e., cross‐linker:bovine hemoglobin (bHb) molar ratio, gas‐liquid exchange time, temperature during sodium dithionite addition, and number of diafiltration cycles) and the biophysical properties of both T‐ and R‐state PolybHbs. Our results showed that, the duration of the fast‐step auto‐oxidation phase of R‐state PolybHb increased with decreasing glutaraldehyde:bHb molar ratio. Additionally, T‐state PolybHbs exhibited significantly higher bimolecular rate constants for binding to Hp and unimolecular O2 offloading rate constants compared to R‐state PolybHbs. The methemoglobin (metHb) level in the final product was insensitive to the molar ratio of glutaraldehyde to bHb for all PolybHbs. During tangential flow filtration processing of the final product, 14 diafiltration cycles was found to yield the lowest metHb level.

Apohemoglobin (apoHb) is a dimeric globular protein with two vacant heme‐binding pockets that can bind heme or other hydrophobic ligands. Purification of apoHb is based on partial hemoglobin (Hb) unfolding to facilitate heme extraction into an organic solvent. However, current production methods are time consuming, difficult to scale up, and use highly flammable and toxic solvents. In this study, a novel and scalable apoHb production method was developed using an acidified ethanol solution to extract the hydrophobic heme ligand into solution and tangential flow filtration to separate heme from the resultant apoprotein. Total protein and active protein yields were >95% and ~75%, respectively, with <1% residual heme in apoHb preparations and >99% purity from sodium dodecyl sulfate–polyacrylamide gel electrophoresis analysis. Virtually no loss of apoHb activity was detected at 4°C, −80°C, and in lyophilized form during long term storage. Structurally, size exclusion chromatography (SEC) and circular dichroism indicated that apoHb was dimeric with a ~25% reduction of helical content compared to Hb. Furthermore, mass spectroscopy and reverse‐phase chromatography indicated that the mass of the α and β subunits were virtually identical to the theoretical mass of these subunits in Hb and had no detectable oxidative modifications upon heme removal from Hb. SEC confirmed that apoHb bound to haptoglobin at a similar ratio to that of native Hb. Finally, reconstituted Hb (rHb) was processed via a hemichrome removal method to isolate functional rHb for biophysical characterization in which the O2 equilibrium curve, O2 dissociation, and CO association kinetics of rHb were virtually identical to native Hb. Overall, this study describes a novel and improved method to produce apoHb, as well as presents a comprehensive biochemical analysis of apoHb and rHb.

Apohemoglobin (apoHb) is produced by removing heme from hemoglobin (Hb). However, preparations of apoHb may contain damaged globins, which render total protein assays inaccurate for active apoHb quantification. Fortunately, apoHb heme-binding sites react with heme via the proximal histidine-F8 (His-F8) residue, which can be monitored spectrophotometrically. The bond between the His-F8 residue of apoHb and heme is vital for maintenance of fully functional and cooperative Hb. Additionally, most apoHb drug delivery applications facilitate hydrophobic drug incorporation inside the apoHb hydrophobic heme-binding pocket in which the His-F8 residue resides. This makes the His-F8 residue a proper target for apoHb activity quantification. In this work, dicyanohemin (DCNh), a stable monomeric porphyrin species, was used as a probe molecule to quantify active apoHb through monocyanohemin-His-F8 bond formation. ApoHb activity was quantified via the analysis of the 420 nm equilibrium absorbance of DCNh and apoHb mixtures. His-F8 saturation was determined by the presence of an inflection point from a plot of the 420 nm absorbance of a fixed concentration of apoHb against an increasing DCNh concentration. Various concentrations of a stock apoHb solution were tested to demonstrate the precision of the assay. The accuracy of the assay was assessed via spectral deconvolution, confirming His-F8 saturation at the inflection point. The effect of the heme-binding protein bovine serum albumin and precipitated apoHb on assay sensitivity was not significant. An analysis of the biophysical properties of reconstituted Hb confirmed heme-binding pocket activity. Taken together, this assay provides a simple and reliable method for determination of apoHb activity.

Haptoglobin (Hp) is a plasma glycoprotein that scavenges cell-free hemoglobin (Hb). Hp has various potential therapeutic applications, but it has been mainly studied for treatment of acute hemolytic conditions that can arise from situations such as massive blood transfusion, infusion of stored red blood cells, severe burns, trauma, sepsis, radiation injury, and others. Therefore, Hp may also be beneficial during chronic hemolytic disease states such as hereditary spherocytosis, nocturnal hemoglobinuria, sickle-cell anemia, and malaria. Various methods have been developed to purify Hp from plasma or plasma fractions. However, none of these methods have exploited the large molecular weight (MW) range distribution of Hp polymers to easily isolate Hp from other plasma proteins. The present study used tangential flow filtration (TFF) to isolate polymeric Hp from plasma proteins using human Fraction IV (FIV) as the starting material. After removal of insoluble material from a suspension of FIV paste, the protein mixture was clarified on a 0.2 μm hollow fiber (HF) TFF filter. The clarified protein solution was then bracketed based on protein MW using HF filters with MW cutoffs (MWCOs) of 750, 500, and 100 kDa. Using untreated FIV, the Hp purity of the main bracket was~75% with a total Hb binding capacity (HbBC) yield of 1.2 g starting from 500 g of FIV paste. However, pretreatment of FIV with fumed silica to remove lipoproteins increased Hp purity to >95% with a HbBC yield of 1.7 g per 500 g of FIV. Taken together this study provides a novel and scalable method to purify Hp from plasma or plasma fractions.

Photodynamic therapy (PDT) has been shown to effectively treat cancer by producing cytotoxic reactive oxygen species via excitation of photosensitizer (PS). However, most PS lack tumor cell specificity, possess poor aqueous solubility, and cause systemic photosensitivity. Removing heme from hemoglobin (Hb) yields an apoprotein called apohemoglobin (apoHb) with a vacant heme-binding pocket that can efficiently bind to hydrophobic molecules such as PS. In this study, the PS aluminum phthalocyanine (Al-PC) was bound to the apoHb-haptoglobin (apoHb-Hp) protein complex, forming an apoHb-Al-PC-Hp (APH) complex. The reaction of Al-PC with apoHb prevented Al-PC aggregation in aqueous solution, retaining the characteristic spectral properties of Al-PC. The stability of apoHb-Al-PC was enhanced via binding with Hp to form the APH complex, which allowed for repeated Al-PC additions to maximize Al-PC encapsulation. The final APH product had 65% of the active heme-binding sites of apoHb bound to Al-PC and a hydrodynamic diameter of 18 nm that could potentially reduce extravasation of the molecule through the blood vessel wall and prevent kidney accumulation of Al-PC. Furthermore, more than 80% of APH’s absorbance spectra were retained when incubated for over a day in plasma at 37 °C. Heme displacement assays confirmed that Al-PC was bound within the heme-binding pocket of apoHb and binding specificity was demonstrated by ineffective Al-PC binding to human serum albumin, Hp, or Hb. In vitro studies confirmed enhanced singlet oxygen generation of APH over Al-PC in aqueous solution and demonstrated effective PDT on human and murine cancer cells. Taken together, this study provides a method to produce APH for enhanced PDT via improved PS solubility and potential targeted therapy via uptake by CD163+ macrophages and monocytes in the tumor (i.e., tumor-associated macrophages). Moreover, this scalable method for site-specific encapsulation of Al-PC into apoHb and apoHb-Hp may be used for other hydrophobic therapeutic agents.