This research is focused on a study of the relationship between mechanical behavior, microstructure and fracture toughness of a Ti-6Al-4V alloy in both coarse-grained (CG) and ultrafine-grained (UFG) conditions. The UFG state with a primary alpha-phase grain size, but with different orientations with respect to the testing direction, was produced by equal-channel angular pressing (ECAP) after thermo-mechanical treatment. Fracture toughness and mechanical testing were conducted at a temperature of 196 °C. A duplex UFG structure formation in the Ti-6Al-4V alloy led to an enhancement of yield stress and a decrease in the fracture toughness at 196 С by comparison with the CG alloy. The lowest values of fracture toughness were observed in a sample in which there were elongated grains lying parallel to the loading direction during testing compared to the situation where the grains were perpendicular to this direction. The reasons for the reduction in fracture toughness in the UFG Ti alloy are discussed.
This research examines the creep behavior of an ultrafine‐grained (UFG) Ti−6Al−4V alloy processed by equal‐channel angular pressing followed by extrusion. It is shown that modifying the surface of the UFG alloy with nitrogen ions and then applying of a coating of (Ti + V)N inhibits the softening of the UFG alloy at temperatures up to 700 K due to a barrier effect in which the coating hinders the release of dislocations onto the surface. The differences in the mechanisms of crack initiation and failure of UFG samples are also examined both with and without a coating. The prospects of the proposed approach to the improving of titanium alloys are discussed, including the formation of an UFG structure in the bulk of the material and subsequent modification by ion‐plasma methods for the manufacture of highly loaded parts operating at elevated operating temperatures.
Abstract. An overall approach to enhance service properties of Ti alloys is based on material nanostructuring in its volume and surface layer. In this work ultrafine-grained (UFG) structure is formed in Ti-6Al-4V alloy through equal channel angular pressing via the Conform scheme with subsequent drawing. Samples modelling the shape of blades are prepared. Their surface is subjected to ion implantation with N + . Fatigue tests are performed in the conditions imitating the stress-strain state of blades. It is shown the increasing the resistance of a high-cycle fatigue of blades due to formation of the UFG structure and subsequent surface modification in the material. The fatigue behaviour of the UFG alloy subjected to ion implantation is discussed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.