In this article, a method that allows sharing responsibilities for the generation of harmonic currents between the utility and consumers powered by one point of common coupling (PCC) is addressed. For these purposes, mathematical modeling of the power supply system (PSS) with two consumers is carried out in order to introduce new indices using the simplest PSS structure as an example. Two indices are introduced that quantify the consumers’ contribution to the distortion of current and voltage at the PCC and that evaluate harmonic emission from the utility side. Experimental tests are carried out where both linear and nonlinear loads are considered, capacitive loads are taken into account, and harmonic distortions from the utility side are modeled to show the applicability of the indices in a wide range of load types. The experiments confirmed the theoretical results and illustrated that the quantitative assessment of the contributions is unambiguous. It suggests that the proposed criterion could be a reasonable basis for further tax policy on harmonic pollution for each consumer at the PCC and for the utility.
The paper deals with issues of modeling nonlinear electrical loads of various types, such an uncontrolled rectifier, thyristor rectifier, thyristor power regulator and mixed equivalent nonlinear load. For these load types, existing analytical expressions were identified to determine the magnitudes of harmonic currents, and waveforms of currents were obtained during measurements in laboratory conditions with variable parameters of the grid impedance and load. The obtained results were compared, and it was found that the error in determining the magnitudes of harmonic currents can reach 60% for an individual load and 54% for an equivalent load. A more accurate method for determining the parameters of nonlinear electrical load is also proposed, which is based on the application of shunt harmonic filters. In laboratory conditions, it was found that when using the developed method, the error did not exceed 10% for an individual load and 14% for an equivalent load.
The method for assessing the contributions of distortion sources based on measuring consumer currents and calculating their projections onto the supply current vector is considered in the paper. Determination of contributions is carried out on the basis of the developed model of an industrial enterprise in the food industry in MATLAB Simulink software. This study presents various cases of simulation, including variable parameters of linear and non-linear consumer load, changes in parameters of external distortion sources and passive harmonic filters. It is shown that the considered method gives correct results in the absence of external distortions in the electrical grid. The considered criteria for the share contributions make it possible to estimate the most efficient place for installing a passive filter in the absence of external distortions. An indicator for evaluating external distortions has also been developed based on calculating the projection of the harmonic system current onto the harmonic current of the shunt filter at the considered frequency.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.