Memristors are two-terminal passive circuit elements that have been developed for use in non-volatile resistive random-access memory and may also be useful in neuromorphic computing. Memristors have higher endurance and faster read/write times than flash memory and can provide multi-bit data storage. However, although two-terminal memristors have demonstrated capacity for basic neural functions, synapses in the human brain outnumber neurons by more than a thousandfold, which implies that multi-terminal memristors are needed to perform complex functions such as heterosynaptic plasticity. Previous attempts to move beyond two-terminal memristors, such as the three-terminal Widrow-Hoff memristor and field-effect transistors with nanoionic gates or floating gates, did not achieve memristive switching in the transistor. Here we report the experimental realization of a multi-terminal hybrid memristor and transistor (that is, a memtransistor) using polycrystalline monolayer molybdenum disulfide (MoS) in a scalable fabrication process. The two-dimensional MoS memtransistors show gate tunability in individual resistance states by four orders of magnitude, as well as large switching ratios, high cycling endurance and long-term retention of states. In addition to conventional neural learning behaviour of long-term potentiation/depression, six-terminal MoS memtransistors have gate-tunable heterosynaptic functionality, which is not achievable using two-terminal memristors. For example, the conductance between a pair of floating electrodes (pre- and post-synaptic neurons) is varied by a factor of about ten by applying voltage pulses to modulatory terminals. In situ scanning probe microscopy, cryogenic charge transport measurements and device modelling reveal that the bias-induced motion of MoS defects drives resistive switching by dynamically varying Schottky barrier heights. Overall, the seamless integration of a memristor and transistor into one multi-terminal device could enable complex neuromorphic learning and the study of the physics of defect kinetics in two-dimensional materials.

Atomically thin MoS2/graphene heterostructures are promising candidates for nanoelectronic and optoelectronic technologies. Among different graphene substrates, epitaxial graphene (EG) on SiC provides several potential advantages for such heterostructures, including high electronic quality, tunable substrate coupling, wafer-scale processability, and crystalline ordering that can template commensurate growth. Exploiting these attributes, we demonstrate here the thickness-controlled van der Waals epitaxial growth of MoS2 on EG via chemical vapor deposition, giving rise to transfer-free synthesis of a two-dimensional heterostructure with registry between its constituent materials. The rotational commensurability observed between the MoS2 and EG is driven by the energetically favorable alignment of their respective lattices and results in nearly strain-free MoS2, as evidenced by synchrotron X-ray scattering and atomic-resolution scanning tunneling microscopy (STM). The electronic nature of the MoS2/EG heterostructure is elucidated with STM and scanning tunneling spectroscopy, which reveals bias-dependent apparent thickness, band bending, and a reduced band gap of ∼0.4 eV at the monolayer MoS2 edges.

van der Waals heterojunctions between two-dimensional (2D) layered materials and nanomaterials of different dimensions present unique opportunities for gate-tunable optoelectronic devices. Mixed-dimensional p-n heterojunction diodes, such as p-type pentacene (0D) and n-type monolayer MoS (2D), are especially interesting for photovoltaic applications where the absorption cross-section and charge transfer processes can be tailored by rational selection from the vast library of organic molecules and 2D materials. Here, we study the kinetics of excited carriers in pentacene-MoS p-n type-II heterojunctions by transient absorption spectroscopy. These measurements show that the dissociation of MoS excitons occurs by hole transfer to pentacene on the time scale of 6.7 ps. In addition, the charge-separated state lives for 5.1 ns, up to an order of magnitude longer than the recombination lifetimes from previously reported 2D material heterojunctions. By studying the fractional amplitudes of the MoS decay processes, the hole transfer yield from MoS to pentacene is found to be ∼50%, with the remaining holes undergoing trapping due to surface defects. Overall, the ultrafast charge transfer and long-lived charge-separated state in pentacene-MoS p-n heterojunctions suggest significant promise for mixed-dimensional van der Waals heterostructures in photovoltaics, photodetectors, and related optoelectronic technologies.

With reduced degrees of freedom, structural defects are expected to play a greater role in two-dimensional materials in comparison to their bulk counterparts. In particular, mechanical strength, electronic properties, and chemical reactivity are strongly affected by crystal imperfections in the atomically thin limit. Here, ultra-high vacuum (UHV) scanning tunneling microscopy (STM) and spectroscopy (STS) are employed to interrogate point and line defects in monolayer MoS 2 grown on epitaxial graphene (EG) at the atomic scale. Five types of point defects are observed with the majority species showing apparent structures that are consistent with vacancy and interstitial models. The total defect density is observed to be lower than MoS 2 grown on other substrates, and is likely attributed to the van der Waals epitaxy of MoS 2 on EG.Grain boundaries (GBs) with 30° and 60° tilt angles resulting from the rotational commensurability of MoS 2 on EG are more easily resolved by STM than atomic force microscopy at similar scales due to the enhanced contrast from their distinct electronic states. For example, band gap reduction to ~0.8 eV and ~0.5 eV is observed with STS for 30° and 60° GBs, respectively. In addition, atomic resolution STM images of these GBs are found to agree well with proposed structure models. This work offers quantitative insight into the structure and properties of common defects in MoS 2 , and suggests pathways for tailoring the performance of MoS 2 /graphene heterostructures via defect engineering. 2 TOC Figure

Two-dimensional transition metal dichalcogenides (TMDCs) have recently attracted attention due to their superlative optical and electronic properties. In particular, their extraordinary optical absorption and semiconducting band gap have enabled demonstrations of photovoltaic response from heterostructures composed of TMDCs and other organic or inorganic materials.However, these early studies were limited to devices at the micrometer scale and/or failed to exploit the unique optical absorption properties of single-layer TMDCs. Here we present an experimental realization of a large-area type-II photovoltaic heterojunction using single-layer molybdenum disulfide (MoS 2 ) as the primary absorber, by coupling it to the organic π-donor polymer PTB7. This TMDC-polymer heterojunction exhibits photoluminescence intensity that is tunable as a function of the thickness of the polymer layer, ultimately enabling complete quenching of the TMDC photoluminescence. The strong optical absorption in the TMDC-polymer

Isopycnic density gradient ultracentrifugation (iDGU) has been widely applied to sort nanomaterials by their physical and electronic structure. However, the commonly used density-gradient medium iodixanol has a finite maximum buoyant density that prevents the use of iDGU for high-density nanomaterials. Here, we overcome this limit by adding cesium chloride (CsCl) to iodixanol, thus increasing its maximum buoyant density to the point where the high-density two-dimensional nanomaterial rhenium disulfide (ReS2) can be sorted in a layer-by-layer manner with iDGU. The resulting aqueous ReS2 dispersions show photoluminescence at ∼1.5 eV, which is consistent with its direct bandgap semiconductor electronic structure. Furthermore, photocurrent measurements on thin films formed from solution-processed ReS2 show a spectral response that is consistent with optical absorbance and photoluminescence data. In addition to providing a pathway for effective solution processing of ReS2, this work establishes a general methodology for sorting high-density nanomaterials via iDGU.

Lithium-ion batteries (LIBs) have achieved widespread utilization as primary rechargeable energy storage devices. In recent years, significant advances have been made in two-dimensional (2D) materials that have the potential to bring unprecedented functionality to next-generation LIBs. While many 2D materials can serve as a new class of active materials that exhibit superlative energy and power densities, they can also be employed as versatile additives that improve the kinetics and stability of LIBs. Here, we present a Perspective on how 2D materials can impact each of the primary components of a LIB including the anode, cathode, conductive additive, electrode−electrolyte interface, separator, and electrolyte. In this manner, emerging opportunities and challenges for 2D materials are identified that can inform future research on highperformance LIBs.

Nanopatterning and layer-by-layer thinning of black phosphorus is demonstrated with conductive atomic-force-microscope anodic oxidation. The liquid-phase patterning byproduct is readily removed by water rinsing. An alternating-current bias enables direct nanopatterning and thinning on insulating substrates such as SiO /Si. Field-effect transistors with patterned channels show significant improvements in current modulation by up to a factor of 50.