No abstract

No abstract

Abstract-This paper presents and compares two candidate large-scale propagation path loss models, the alpha-beta-gamma (ABG) model and the close-in (CI) free space reference distance model, for the design of fifth generation (5G) wireless communication systems in urban micro-and macro-cellular scenarios. Comparisons are made using the data obtained from 20 propagation measurement campaigns or ray-tracing studies from 2 GHz to 73.5 GHz over distances ranging from 5 m to 1429 m. The results show that the one-parameter CI model has a very similar goodness of fit (i.e., the shadow fading standard deviation) in both line-of-sight and non-line-of-sight environments, while offering substantial simplicity and more stable behavior across frequencies and distances, as compared to the three-parameter ABG model. Additionally, the CI model needs only one very subtle and simple modification to the existing 3GPP floating-intercept path loss model (replacing a constant with a close-in free space reference value) in order to provide greater simulation accuracy, more simplicity, better repeatability across experiments, and higher stability across a vast range of frequencies.

The main goal of this letter is to obtain models for path loss exponents and shadowing for the radio channel between airborne unmanned aerial vehicles (UAVs) and cellular networks. In this pursuit, field measurements were conducted in live LTE networks at the 800 MHz frequency band, using a commercial UAV. Our results show that path loss exponent decreases as the UAV moves up, approximating freespace propagation for horizontal ranges up to tens of kilometers at UAV heights around 100 m. Our findings support the need of height-dependent parameters for describing the propagation channel for UAVs at different heights.

In this measurement study the signal activity and power levels are measured in the European Industrial, Scientific, and Medical band 863-870 MHz in the city of Aalborg, Denmark. The target is to determine if there is any interference, which may impact deployment of Internet of Things devices. The focus is on the Low Power Wide Area technologies LoRa and SigFox. The measurements show that there is a 22-33 % probability of interfering signals above-105 dBm within the mandatory LoRa and SigFox 868.0-868.6 MHz band in a shopping area and a business park in downtown Aalborg, which thus limits the potential coverage and capacity of LoRa and SigFox. However, the probability of interference is less than 3 % in the three other measurement locations in Aalborg. Finally, a hospital and an industrial area are shown to experience high activity in the RFID subband 865-868 MHz, while the wireless audio band 863-865 MHz has less activity.

No abstract

In this paper the coverage and capacity of SigFox, LoRa, GPRS, and NB-IoT is compared using a real site deployment covering 8000 km 2 in Northern Denmark. Using the existing Telenor cellular site grid it is shown that the four technologies have more than 99 % outdoor coverage, while GPRS is challenged for indoor coverage. Furthermore, the study analyzes the capacity of the four technologies assuming a traffic growth from 1 to 10 IoT device per user. The conclusion is that the 95 %-tile uplink failure rate for outdoor users is below 5 % for all technologies. For indoor users only NB-IoT provides uplink and downlink connectivity with less than 5 % failure rate, while SigFox is able to provide an unacknowledged uplink data service with about 12 % failure rate. Both GPRS and LoRa struggle to provide sufficient indoor coverage and capacity.

Abstract-In this simulation work the coverage of GPRS, Narrowband-IoT, LoRa, and SigFox is compared in a realistic scenario, covering 7800 km 2 and using Telenor's commercial 2G, 3G, and 4G deployment. The target is to evaluate which of the four technologies provides the best coverage for Internet of Things devices, which may be located deep indoor.The results show that Narrowband-IoT, having the best Maximum Coupling Loss performance of 164 dB, also provides the best coverage. This is despite the fact that LoRa and SigFox deployments with omnidirectional antennas are found to provide 3 dB lower link loss on average. In the deployment 11 % of the geographical area contains devices, located both in rural and urban areas. The NB-IoT has an outage below 1 % for locations experiencing 20 dB indoor penetration loss in addition to the outdoor path loss. SigFox performs similarly, while LoRa cannot provide coverage for 2 % of those locations. For the challenging deep indoor case, where 30 dB additional penetration loss is expected, NB-IoT has 8 % outage while SigFox and LoRa is unable to cover 13 % and 20 % of the locations.The four technologies may not be deployed at all existing site locations and therefore the work also includes a study of the coverage as a function of the minimum Inter-Site Distance, where sites closer than 2, 4, and 6 km are filtered out. The results show that SigFox and NB-IoT have outage probabilities below 5 % even though sites closer than 4 km are removed from the simulations.