In this study, behaviour of bi-adhesive used in the repair of damaged parts was analyzed, using the finite element method. In a double-strap joint with an embedded patch, patch is embedded into the adherents for structural requirements. In addition, to increase the strength of the joint, two adhesives are used to bond the adherents. This approach reduces stress concentration at the overlap ends, increases the load capacity and delays the failure. These effects give rise to higher joint strength. For this purpose, a stiff adhesive, FM73 produced by Cytec Fiberite, was applied in the middle portion of the overlap, while a softer adhesive, SBT9244 from 3M, was applied towards the edges, prone to stress concentrations. Non-linear finite element analyses were carried out to predict the failure loads, to assist with the geometric design and to identify effective ratios of sizes to maximize joint strength.
In this study, multi-layered composite pipes with varied orientation angles and subjected to internal pressure were investigated by using the 3-D finite element method (FEM) and through experimental tests. The composite pipes were made of E-glass and T300/934 carbon fiber. The studies were carried out experimentally, analytically and numerically. The T300/934 carbon fiber reinforced composite pipes and E-glass reinforced composite pipes were given numerical model codes via ANSYS 14.5 software. These models were then compared with analytical results in the literature and with the experimental results. Finite element analyses (FEA) were carried out to predict failure loads. Each layer of the composite pipes was numerically examined from various orientation angles. Hoop and shear stress wereobtained numerically for each layer. Radial strain and radial stress were achieved in the radial direction of the composite pipes. Shear extension coupling was considered because the layup angles with + θ and - θ layers were in varied radii. Subsequently, the effects of the orientation angles were examined for all models. Moreover, it was found that an embedded adhesive joint is important for industrial applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.