Urban growth is one of the major causes of flooding in urban areas. This affects the runoff coefficients, which is among the most important factors that affect the design of storm water drainage systems. Changing the runoff coefficient will affect the design parameters of the drainage network, including outfall discharge, velocity, lag time and cost of construction. This study aims to assess the effect of changing the runoff coefficient due to urban growth on the design of a storm water drainage system. The hydrological models Hyfran, StormCAD and GIS are used to analyze different runoff coefficients. This study examines three zones in Dammam in the Kingdom of Saudi Arabia (KSA). The data developed from the models for the current case studies are used to develop an empirical equation to predict the max discharge for other catchments. The discharge is a function of the return period, runoff coefficient, drainage density, longest path, rainfall intensity and catchment area. To validate the developed equation, we use it to estimate the discharge in a real case study in South Korea. A comparison between the measured discharge and estimated discharge shows that the empirical equation is capable of predicting the maximum discharge for different catchments with high accuracy. Then, the validation of the models is carried out to determine the effect of the runoff coefficient on the design of a storm water drainage system in a case study in KSA. The results show that an increasing runoff coefficient due to urban growth increases the outfall discharge and velocity of storm water drainage systems, as well as affecting the cost of construction and decreasing the lag time. The cost increases by two to three times with increasing urbanization. This study provides a new perspective on the hydrologic impact of urban growth on the design of storm water drainage systems, which are essential for flood management. Moreover, the relationship between urban growth and the cost of storm drainage networks is explored, which could help decision makers to make appropriate judgements.
The shortage of water is a major obstruction to the social and economic development of many countries, including Egypt. Therefore, there is an urgent need to properly manage water resources to achieve optimum water use. One way of saving available water resources is to reduce evaporation that leads to the loss of a large amount of water from reservoirs and open lakes. This paper aims to use a floating photovoltaic system (FPVS) to cover a lake’s water surface to reduce evaporation and also for energy production. This methodology was applied to Lake Nasser as one of the largest lakes in the world where much evaporation happens due to its large area, arid environments, and the shallow depths of some parts of the lake. The estimated evaporation from the lake was 12.0 × 109 m3/year. The results show that covering 25%, 50%, 75%, and 100% of the lake can save about 2.1, 4.2, 6.3, 7.0, and 8.4 × 109 m3/year and produce energy of 2.85 × 109, 5.67 × 109, 8.54 × 109, and 11.38 × 109 MWh/year, respectively. Covering areas of shallow water depth was more efficient and economical. The results show that covering 15% of the lake’s area (depths from 0.0 to 3.0 m) can save 2.66 × 109 m3/year and produce 1.7 MWh/year. Covering 25% of the lake’s area (depths from 0.0 to 7.0) can save 3.5 × 109 m3/year and produce 2.854 MWh/year. Using an FPVS to cover parts of Lake Nasser could help manage water resources and energy production for Egypt to overcome the likely shortage of water resources due to population growth. This system could be applied in different locations of the world which could help in increasing water resources and energy production, especially in arid and semi-arid regions.
Storm water drainage system in urban areas became a deterministic system, especially in light of the current climate changes. This system eliminates the excess water resulting from heavy rainfall, which leads to disruption of daily life. Irregular maintenance of the network system, problems appear, especially the blockage of the covers or network pipes, which affects the efficiency of the network. This study deals with the experimental investigation of blockage on storm network system and the relationship between efficiency of the system and blockage parameters. Many scenarios of blockage within grate and pipe were studied and its impact on storm system efficiency calculated. For the pipe system, two scenarios were studied; the first one is the blockage of end main pipe with relative blockage height (15%, 30%, 50%, 70%, and 90%). The second one is the blockage through the main pipe with relative blockage height (25%, 50%) and relative blockage length (33%, 67%, and 100%). For grate, the blockage is investigated with the blockage area ratio (12.5%, 25%, 37.5%, and 50%). In addition, the combined blockage of grate and pipe was studied. Finally, an equation has been created to estimate the system efficiency as a function of blockage ratios and system discharges. The results indicated that for surface blockage (12.5%, 25%, 37.5%, and 50%), the discharge efficiency decreased as the amount of blockage increased with different grate blockage by (17.8%, 19.3%, 21%, and 24.6%), respectively.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.