Both passive and active microfluidic chips are used in many biomedical and chemical applications to support fluid mixing, particle manipulations, and signal detection. Passive microfluidic devices are geometry-dependent, and their uses are rather limited. Active microfluidic devices include sensors or detectors that transduce chemical, biological, and physical changes into electrical or optical signals. Also, they are transduction devices that detect biological and chemical changes in biomedical applications, and they are highly versatile microfluidic tools for disease diagnosis and organ modeling. This review provides a comprehensive overview of the significant advances that have been made in the development of microfluidics devices. We will discuss the function of microfluidic devices as micromixers or as sorters of cells and substances (e.g., microfiltration, flow or displacement, and trapping). Microfluidic devices are fabricated using a range of techniques, including molding, etching, three-dimensional printing, and nanofabrication. Their broad utility lies in the detection of diagnostic biomarkers and organ-on-chip approaches that permit disease modeling in cancer, as well as uses in neurological, cardiovascular, hepatic, and pulmonary diseases. Biosensor applications allow for point-of-care testing, using assays based on enzymes, nanozymes, antibodies, or nucleic acids (DNA or RNA). An anticipated development in the field includes the optimization of techniques for the fabrication of microfluidic devices using biocompatible materials. These developments will increase biomedical versatility, reduce diagnostic costs, and accelerate diagnosis time of microfluidics technology.
Multiple myeloma is a hematological cancer type. For its treatment, Bortezomib has been widely used. However, drug resistance to this effective chemotherapeutic has been developed for various reasons. 2D cell cultures and animal models have failed to understand the MM disease and Bortezomib resistance. It is therefore essential to utilize new technologies to reveal a complete molecular profile of the disease. In this review, we in-depth examined the possible molecular mechanisms that cause Bortezomib resistance and specifically addressed MM and Bortezomib resistance. Moreover, we also included the use of nanoparticles, 3D culture methods, microfluidics, and organ-on-chip devices in multiple myeloma. We also discussed whether the emerging technology offers the necessary tools to understand and prevent Bortezomib resistance in multiple myeloma. Despite the ongoing research activities on MM, the related studies cannot provide a complete summary of MM. Nanoparticle and 3D culturing have been frequently used to understand MM disease and Bortezomib resistance. However, the number of microfluidic devices for this application is insufficient. By combining siRNA/miRNA technologies with microfluidic devices, a complete molecular genetic profile of MM disease could be revealed. Microfluidic chips should be used clinically in personal therapy and point-of-care applications. At least with Bortezomib microneedles, it could be ensured that MM patients can go through the treatment process more painlessly. This way, MM can be switched to the curable cancer type list, and Bortezomib can be targeted for its treatment with fewer side effects.
Electricity-generating devices are among the most popular recent topics due to increasing global energy requirements, which have propelled many researchers to investigate different approaches. One approach involves electroreceptive animals. In this regard, we proposed a polymer-based energy generator converting Gibbs free energy into usable electricity. We developed a polymer-based device inspired by electric eels and modified it to extend the maximum power generation limits by adding nickel-nickel and aluminumcopper current collector (CC) backings. Thus, the imitation of electrocytes and the aims to increase the voltage, which was generated by taking advantage of electrochemical reactions between metals and polymers, were successfully achieved. In each tetrameric package ($ 0:8 cm 3 ) supported by nickel-nickel CCs, the voltage output was more than 350 mV, while tetrameric cells with copper-aluminum CC pairs led to an open-circuit voltage of more than 900 mV. The conversion of free energy into electricity is attributed to the electricity generation of cells supported by the Ni-Ni CC pair to the ion gradient between the layers, as in electrocyte. In the case of using Cu-Al CCs, electrochemical reactions between the supporting metals and polymers are prominent. The generation of such high voltages is due to the ion concentration gradient and electrochemical interactions. Only slight changes in the output voltage value related to the corrosion on the aluminum CC in time provide a distinctive advantage for long-term power needs. Thus, it can be stated that this bioinspired energy-generating device offers the potential for eventually becoming a power source for small-scale electrical systems and for fulfilling daily personal energy needs.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.