INTRODUÇÃOO lodo de esgoto tem um alto potencial de riscos à saúde pública, ao ambiente e à proliferação de vetores de moléstias e organismos nocivos [1]. O lodo de estação de tratamento de esgoto (ETE) gera uma grande quantidade de resíduo devido a restos metabólicos do homem que não se desintegram com o tratamento [2]. A característica do lodo de ETE é resultante do tratamento a que é submetido que pode ser químico, físico e/ou biológico [3]. A causa para o aumento da produção de resíduos sólidos gerados pelo homem e dos danos provocados ao meio ambiente está na falta de políticas gerenciais, tecnologias de reuso e educação ambiental que levem à disposição adequada dos mesmos [4].Dentre as principais formas de disposição do lodo de ETE se destacam a incineração, disposição em aterros sanitários e uso agrícola. Em países da Europa e da América do Norte, o lodo de tratamento de esgoto geralmente é incinerado e depositado em aterros sanitários ou utilizado em áreas agrícolas. No Brasil, é comum o lodo de ETE ser descartado em lixões a céu aberto ou em aterros sanitários. Trabalhos vêm sendo feitos para modificar esta situação a partir de ações preventivas de redução e reciclagem.A reciclagem destes materiais é de grande interesse para as indústrias, principalmente devido às exigências dos órgãos ambientais. Uma das práticas estudadas para destinação correta destes resíduos tem sido a utilização em materiais da construção civil, como blocos de vedação e telhas à base Goytacazes, RJ, 28013-602 oraisabela@gmail.com, vieira@uenf.br, rosane.toledo@gmail.com, aline_intorne@yahoo.com.br Resumo Este trabalho teve por objetivo avaliar a incorporação de resíduo de estação de tratamento de esgoto (ETE) na produção de cerâmica vermelha. As matérias-primas utilizadas foram: massa cerâmica argilosa e resíduo de ETE provenientes do município de Campos dos Goytacazes -RJ. As matérias-primas foram caracterizadas pelas técnicas de fluorescência de raios X e difração de raios X; além disso, foi determinada a área de superfície específica das mesmas por meio das técnicas de BET e azul de metileno. O comportamento térmico do resíduo de ETE foi avaliado por meio de análise termogravimétrica. Formulações foram preparadas com 0, 2,5, 10 e 15% em massa de resíduo de ETE incorporados à massa argilosa. Corpos de prova foram confeccionados por prensagem uniaxial a 20 MPa com 8% de umidade para calcinação a 950 °C. As propriedades físicas e mecânicas avaliadas das cerâmicas calcinadas foram retração linear, absorção de água e resistência à compressão. A microestrutura destas peças foi investigada com auxílio de microscopia eletrônica de varredura. Os resultados indicaram que este tipo de resíduo deve ser incorporado em pequenas quantidades (até 2,5%) para não prejudicar as propriedades físicas e mecânicas da cerâmica. Palavras-chave: resíduo de ETE, reciclagem, cerâmica vermelha.
Abstract
Every day expressive amounts of coffee grounds waste generated during making the coffee beverage are produced worldwide. The aim of this work was to investigate the valorization potential of the coffee grounds waste as an alternative pore-forming agent to produce porous kaolin-based ceramic supports. For this purpose, kaolin-based ceramic support formulations containing up to 40 mass % of coffee grounds waste were pressed and fired at temperatures ranging from 1000 to 1200 ºC. The sintering behavior and technical properties (linear shrinkage, mass loss, apparent density, mechanical strength, and apparent porosity) have been investigated. The microstructural evolution has been accompanied by scanning electron microscopy (SEM) and 3D-confocal microscopy. The obtained results demonstrated that the coffee grounds waste could serve as a very effective pore-forming agent to produce kaolin-based ceramic support with highly porous structures. Such ceramic supports incorporated with coffee grounds waste exhibited values of apparent porosity within the range of 41.87 % to 70.96 %. This results suggests that the coffee grounds waste, in the range of 10 - 40 mass %, could be a highly promising renewable porogenic material to be valorized to produce low-cost kaolin-based ceramic support with good porosity properties. This new approach could be an innovative alternative for the sustainable use of coffee grounds waste.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.