A integração de dados altimétricos e gamaespectrométricos é uma ferramenta útil no mapeamento do regolito e identificação de crostas lateríticas, especialmente em áreas de difícil acesso, como é o caso da Amazônia. A área de estudo, localizada no sudoeste da Amazônia brasileira, tem dois padrões de ocorrência de crostas lateríticas. O primeiro está localizado na margem direita do rio Madeira e associado a platôs com altitudes entre 120 e 150 m e 180 e 204 m. O segundo, localizado na margem esquerda, ocorre em altitudes entre 80 e 110 m e está associado a desníveis locais inferiores a 5 m e não constituem platôs. A aplicação da técnica matemática booleana com dados multifonte contribuiu para a delimitação e hierarquização de áreas favoráveis para a ocorrência de crostas lateríticas e seus produtos do desmantelamento. Os padrões de respostas radiométricos das crostas observados (altos valores de Th/K e U/K) permitiram a correlação de ocorrência de crostas da margem esquerda do rio Madeira com as da margem direita, possibilitando a delimitação cartográfica das crostas. Os resultados foram comparados com os atuais mapas de solo, geomorfológico e geológico, e propiciaram a confirmação da ocorrência das crostas associadas a latossolos, o refinamento cartográfico e a delimitação de áreas pouco favoráveis para a agricultura e potencialmente favoráveis ao fornecimento de material para construção civil (cascalho laterítico).
de radar e de suas principais feições geomorfológicas, assim como as avaliações geológicas, proporcionaram a identifi cação de novas áreas de ocorrência de crostas lateríticas. Essa integração orientou e facilitou sobremaneira os trabalhos de campo, permitiu a ampliação das áreas de ocorrência de crostas lateríticas e o consequente refi namento dos mapas existentes.
O cruzamento dos dados gamaspectrométricos (crostas lateríticas) com os dados aeromagnetométricos propiciou a identifi cação das possíveis rochas fontes das crostas lateríticas, havendo associação tanto com rochas com tendências mais magnéticas, relacionadas a litologias básicas quanto a rochas com tendências menos magnéticas, relacionadas a litoglogias félsicas. Por fi m, o mapeamento do regolito contribuiu para a identifi cação de 8 unidades regolíticas presentes na área, sendo elas latossolos associados a relevo suavemente ondulado, latossolos argilosos associados a planícies sem a presença de morrotes e afl oramentos de matacões rochosos, latossolos arenosos associados a planícies com a presença de afl oramentos de matacões rochosos, morrotes e platôs, cambissolos associados a planícies, crostas lateríticas associadas a relevo suavemente ondulado, crostas lateríticas associadas a platôs, sedimentos aluvionares associados a planícies de inundação e afl oramentos rochosos graníticos. Estes resultados mostraram-se úteis para interpretações geomorfológicas, assim como na identifi cação de áreas mais ou menos favoráveis para a agricultura, considerando sua respectiva fertilidade, e para a construção civil, considerando a utilidade do cascalho laterítico, podendo também contribuir em estudos voltados para o planejamento urbano/ rural, por destacar a ocorrência de materiais superfi ciais assim como as respectivas formas de relevo associadas.
RESUMOAs inundações urbanas causam uma série de problemas ambientais e econômicos devido ao uso inapropriado de áreas sujeitas a alagações naturais. O processo de urbanização traz o aumento de superfícies impermeabilizadas (telhados, calçadas e asfaltos), que geram um aumento do fluxo superficial d'água e diminuição de infiltrações e rebaixamento do lençol freático, o que potencializa as inundações. Este estudo teve como objetivo mapear e mensurar as áreas de inundações urbana na Bacia do Igarapé Belmont e diagnosticar suas causas. Através da análise dos modelados de relevo da Bacia do Belmont em escala de 1:25.000, com a base de dados topográfico com curvas de nível da cidade de Porto Velho, em equidistância de 1 metro e imagens de satélites, utilizou-se a técnica de sobreposição para elaboração das área alagáveis. Foram mapeados dois tipos de áreas de inundações em dois tipos de modelados de relevo Denudacional Tabular de muito fraco grau de entalhamento dos vales e de grande dimensão interfluvial -Dt 12 e do modelado Denudacional Tabular de muito fraco grau de entalhamento dos vales e de média dimensão interfluvial -Dt 13, que são classificadas neste estudo como: Áreas de Constantes Alagações que estão próximas dos cursos d'água e de áreas de fundo de vale com dimensões que chegam a 1.130 km² e com cota altimétrica mínima de 82,1 metros e as Áreas Passíveis de Alagações que são áreas naturalmente alagáveis distantes dos cursos Brazilian Journal of Development Braz. 23427 d'água, com cota altimétrica inferior a 85 metros e de superfície plana de dimensão menor que 160 km², mas devido ao uso de aterro ou de drenagem pluvial, esses pontos alagam somente quando as áreas de alagações constantes já se encontram saturadas. Verifica-se que em todas essas áreas há uma densidade elevada de moradias, com baixa e elevada infraestrutura pública, não distinguindo áreas de população segregada para habitarem estes tipos de relevos. Constata-se a necessidade de um planejamento corretivo para a ocupação urbana da bacia do igarapé Belmont. Palavras-chave:Relevo, Cota altimétrica, Urbanização. ABSTRACTUrban flooding causes a number of environmental and economic problems due to the inappropriate use of areas subject to natural flooding. The process of urbanization brings the increase of waterproofed surfaces (roofs, sidewalks and asphalts), which increase the surface water flow and decrease the infiltration and lowering of the water table, which enhances flooding. This study aimed to map and measure urban flooding areas in the Belmont Igarapé Basin and to diagnose their causes. Through the analysis of the Belmont Basin relief models in a scale of 1: 25,000, with the topographic database with contours of the city of Porto Velho, in 1 meter equidistance and satellite images, we used the technique of overlap for the elaboration of the flooded areas. Two types of floodplain areas were mapped in two types of very low intervaluvial valley notch tabular denudational relief model -Dt 12 and the very low average valley notch tabular denuda...
Este estudo tem o objetivo de estabelecer o nível piezométrico que a vertente tinha antes do deslizamento, a morfometria e a causa do movimento de massa. Para isto, foi utilizada equação de Equilíbrio-Limite, com o Fator de segurança em 1,49 para estabelecer o nível piezométrico necessário para causar o colapso da encosta, como também, a determinação de propriedades geomecânicas, como coesão, densidade, ângulo de atrito, tensão de cisalhamento, limites de Atterberg, além da granulometria e da morfometria. A vertente apresentava o formato convexo no topo e côncavo na base, ambos seccionados no meio pelos formatos retilíneo e côncavo. A inclinação média era de 35,17° em uma dimensão de 46,01m. A Equação indicou um nível piezométrico mínimo de 18,53 metros de altura para o colapso. Um aspecto que influenciou o deslizamento foi à erosão superficial causada por uma galeria de água pluvial, que uma vez rompida, erodiu o pacote de material superficial, Argilo Siltoso Mosqueado, que serve de proteção para a vertente, pois possui maior coesão e plasticidade. Após a completa erosão do pacote superior, houve a exposição pontual do pacote inferior, que após sofrer forte precipitação pluvial de 32,20 mm, ocorrida no dia 30/09/2013, ocasionou a elevação do nível piezométrico deste material inferior, Silto Arenoso Tangencial, de menor coesão e plasticidade que saturou, comportando-se de maneira semi-líquida. Devido este material ser todo o alicerce da encosta, o seu colapso causou todo o deslizamento rotacional da vertente. Verifica-se a importância de manter o material superior desta margem do Rio Landslide in The Madeira River Slope in Porto Velho - RO: A Morfomechanical analysis ABSTRACTThe aims this paper is establish the piezometric level that the slope had before sliding, morphometry and the cause of mass movement. For this, the Equilibrium-Limit equation was used, with the Safety Factor at 1.49 to establish the piezometric level necessary for collapse of the slope, as well as the determination of geomechanical properties, such as cohesion, density, friction angle , shear stress, Atterberg boundaries, granulometry and morphometry. The strand had the convex shape at the top and concave at the base, both sectioned in the middle by the rectilinear and concave shapes. The average slope was 35.17° in a dimension of 46.01m. Equation indicated a minimum piezometric level of18.53 metershigh for collapse. One aspect that influenced the sliding was the superficial erosion caused by a gallery of rainwater, which once ruptured, eroded the package of surface material, Silt Clay Mottled, which serves as protection for the slope, as it has greater cohesion and plasticity. After complete erosion of the upper package, there was a punctual exposition of the lower package, which after suffering heavy rainfall of32.20 mm, occurred on 09/30/2013, caused the elevation of the piezometric level of this lower material, Sand Silt Tangential, of lower cohesion and plasticity that saturated, behaving in a semi-liquid way. Because this material is the whole foundation of the slope, its collapse caused all the rotational slip of the slope. It’s important to maintain the superior material of the slope, aiming at the reduction of shear forces and erosions.Keywords: Piezometric Level, morphometry, Break Circle.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.